首页> 外文OA文献 >Mode Theory of Multi-Armed Spiral Antennas and Its Application to Electronic Warfare Antennas
【2h】

Mode Theory of Multi-Armed Spiral Antennas and Its Application to Electronic Warfare Antennas

机译:多臂螺旋天线的模态理论及其在电子战天线中的应用

摘要

Since their invention about 55 years ago, spiral antennas have earned a reputation for providing stable impedance and far-field patterns over multi-decade frequency ranges. For the first few decades these antennas were researched for electronic warfare receiving applications, primarily in the 2-18 GHz range. This research was often done under conditions of secrecy, and often by private contractors who did not readily share their research, and now have been defunct for decades. Even so, the body of literature on the two-armed variant of these antennas is rich, often leading non-specialists to the misconception that these antennas are completely understood. Furthermore, early work was highly experimental in nature, and was conducted before modern data collection and postprocessing capabilities were widespread, which limited the range of the studies. Recent research efforts have focused on extending the application of spirals into new areas, as well as applying exotic materials to `improveu27 their performance and reduce their size. While interesting results have been obtained, in most instances these were incomplete, often compromising the frequency independent nature of these antennas. This thesis expands the role of the multi-armed spiral outside of its traditional niche of receive-only monopulse direction finding. As a first step, careful study of the spiral-antenna mode theory is undertaken with particular attention paid to the concepts of mode filtering and modal decomposition. A technique for reducing the modal impedance of high arm-count spirals is introduced. The insights gained through this theoretical study are first used to improve the far-field performance of the coiled-arm spiral antenna. Specifically, expanding the number of arms on a coiled arm spiral from two to four while providing proper excitation enables dramatically improved broadside axial ratio and azimuthal pattern uniformity. The multiarming technique is then applied to the design of an antenna with exceptionally stable and clean radiation patterns without use of an absorbing cavity. The multiarming technique allows the spiral to retain its pattern integrity at frequencies well below those of comparable two-armed spiral antennas. A quadrifilar helix-type of end-loading is applied to the end of the spiral, resulting in dramatically-improved low-frequency gain. Careful application of resistive end-loading allows good impedance matching at frequencies as low as one-half of the Mode 1 cutoff frequency, while providing acceptable radiation efficiency due to effective use of the available antenna volume. A novel dual-layering technique for reducing the spiralu27s modal impedance is presented, allowing the antenna to present a good impedance match to a 50 ohm system. The third application of mode theory has been to exploit the wideband multi-mode capability of the multi-armed spiral antenna to implement a simple wide-band radiation pattern nulling technique on a multi-armed spiral antenna. It is shown that wideband nulling is possible and that, in contrast to traditional array antennas, grating lobes do not appear even over extremely wide bandwidths. Simple techniques for addressing the phenomenon of null rotation with frequency are discussed. Finally, mode theory has been used to analyze beamformer non-idealities. This has led to the revelation that the spectral distribution of beamformer errors is at least as important as the magnitude of those errors. Proper choice of beamformer topology can result in noticeable improvement in the antenna performance.
机译:自大约55年前发明以来,螺旋天线已在数十年的频率范围内提供稳定的阻抗和远场方向图赢得了声誉。在最初的几十年中,对这些天线进行了研究,主要用于2-18 GHz范围内的电子战接收应用。这项研究通常是在保密的条件下进行的,并且通常是由不愿分享研究成果的私人承包商完成的,而现在已经解散了数十年。即便如此,有关这些天线的双臂式变体的文献资料丰富,经常导致非专业人员对这些天线已被完全理解的误解。此外,早期的工作本质上是高度实验性的,并且是在现代数据收集和后处理功能普及之前进行的,这限制了研究范围。最近的研究工作集中在将螺旋线的应用扩展到新的领域,以及应用奇异材料来“改善”螺旋线的性能并减小其尺寸。尽管已经获得了有趣的结果,但是在大多数情况下,这些结果是不完整的,通常会损害这些天线的频率独立性。本论文将多臂螺旋的作用扩展到其传统的仅接收单脉冲测向的传统领域之外。第一步,对螺旋天线模式理论进行仔细研究,尤其要注意模式滤波和模式分解的概念。介绍了一种减少高臂数螺旋线的模态阻抗的技术。通过这项理论研究获得的见解首先被用于改善线圈臂螺旋天线的远场性能。具体地说,在提供适当激励的同时,将螺旋臂螺旋上的臂数从两个扩展到四个,可以显着提高宽边轴向比和方位角图案均匀性。然后将多臂技术应用于天线设计,该天线具有非常稳定和干净的辐射方向图,而无需使用吸收腔。多臂技术允许螺旋线在远低于可比的两臂螺旋天线的频率下保持其方向图完整性。螺旋的末端施加了四线螺旋型的末端载荷,从而大大改善了低频增益。小心地施加电阻性端负载可在低至模式1截止频率一半的频率上实现良好的阻抗匹配,同时由于有效利用可用天线体积而提供可接受的辐射效率。提出了一种新颖的双层技术,可降低螺旋模态阻抗,从而使天线呈现出与50欧姆系统良好的阻抗匹配。模式理论的第三个应用是开发多臂螺旋天线的宽带多模能力,以在多臂螺旋天线上实现简单的宽带辐射方向图置零技术。结果表明,宽带调零是可能的,而且与传统的阵列天线相比,即使在极宽的带宽上也不会出现光栅波瓣。讨论了解决零频率旋转现象的简单技术。最后,模式理论已被用于分析波束形成器的非理想性。这导致了一个启示,即波束形成器误差的频谱分布至少与那些误差的大小一样重要。正确选择波束形成器拓扑可以导致天线性能的显着改善。

著录项

  • 作者

    Radway Matthew John;

  • 作者单位
  • 年度 2011
  • 总页数
  • 原文格式 PDF
  • 正文语种
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号