This paper deals with sensorless vector control of PWM-inverter-fed induction motor drives equipped with a three-phase diode rectifier. An electronically controlled braking resistor across the dc link is not used. Instead, the power regenerated during braking is dissipated in the motor while a dc-link overvoltage controller limits the braking torque. Losses in the motor are increased by an optimum flux-braking controller, maximizing either the stator voltage or the stator current depending on the speed. Below the rated speed, the braking times are comparable to those achieved using a braking resistor. The proposed braking scheme is very simple and causes no additional torque ripple. Experimental results obtained using a 2.2-kW induction motor drive show that the proposed scheme works well.
展开▼
