首页> 外文OA文献 >LogAmp electronics and Optical Transmission for the new SPS Beam Position Measurement System
【2h】

LogAmp electronics and Optical Transmission for the new SPS Beam Position Measurement System

机译:用于新型SPS光束位置测量系统的LogAmp电子产品和光学传输

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A new front-end board is under development for the CERN SPS Multi ORbit Position System (MOPOS). Based on logarithmic amplifiers, it measures the beam position over a large dynamic range of beam intensities and resolves the multi-batch structure of the SPS beams. Analogue data are digitized at 10 MS/s, packed in frames by an FPGA and on every turn sent to the readout board, via a 2.4 Gb/s optical transmission link. A first prototype has been successfully tested with several SPS beams. This paper presents an overall description of the system and its capabilities highlighted by the first beam measurements.
机译:CERN SPS多轨道定位系统(MOPOS)的新前端板正在开发中。它基于对数放大器,可在很大的光束强度动态范围内测量光束位置,并解决SPS光束的多批次结构。模拟数据以10 MS / s的速度数字化,由FPGA打包成帧,并通过2.4 Gb / s的光传输链路在每一回合发送到读出板。第一个原型已经通过数个SPS光束成功测试。本文对系统及其功能进行了全面的介绍,首次光束测量突出了这一点。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号