首页> 外文OA文献 >Testing the Reality of Strong Magnetic Fields on T Tauri Stars: The Naked T Tauri Star Hubble 4
【2h】

Testing the Reality of Strong Magnetic Fields on T Tauri Stars: The Naked T Tauri Star Hubble 4

机译:测试T Tauri恒星上强磁场的真实性:赤裸T Tauri恒星哈勃望远镜4

摘要

High resolution optical and infrared (IR) echelle spectra of the naked (diskless) T Tauri star Hubble 4 are presented. The K band IR spectra include 4 Zeeman sensitive Ti I lines along with several magnetically insensitive CO lines. Detailed spectrum synthesis combined with modern atmospheric models is used to fit the optical spectra of Hubble 4 in order to determine its key stellar parameters: Teff = 4158 +/- 56 K; log(g) = 3.61 +/- 0.50; [M/H] = -0.08 +/- 0.05; vsini = 14.6 +/- 1.7 km/s . These stellar parameters are used to synthesize K band spectra to compare with the observations. The magnetically sensitive Ti I lines are all significantly broadened relative to the lines produced in the non-magnetic model, while the magnetically insensitive CO lines are well matched by the basic non-magnetic model. Models with magnetic fields are synthesized and fit to the Ti I lines. The best fit models indicate a distribution of magnetic field strengths on the stellar surface characterized by a mean magnetic field strength of 2.51 +/- 0.18 kG. The mean field is a factor of 2.0 greater than the maximum field strength predicted by pressure equipartition arguments. To confirm the reality of such strong fields, we attempt to refit the observed profiles using a two component magnetic model in which the field strength is confined to the equipartition value representing plage-like regions in one component, and the field is allowed to vary in a cooler component representing spots. It is shown that such a model is inconsistent with the optical spectrum of the TiO bandhead at 7055 Angstroms.
机译:提出了裸露的(无盘的)T Tauri星哈勃4号的高分辨率光学和红外(IR)阶梯光谱。 K波段红外光谱包括4条塞曼敏感的Ti I谱线以及几条对磁不敏感的CO谱线。详细的光谱合成与现代大气模型相结合,用于拟合哈勃望远镜4的光谱,以确定其关键的恒星参数:Teff = 4158 +/- 56 K; log(g)= 3.61 +/- 0.50; [M / H] = -0.08 +/- 0.05; vsini = 14.6 +/- 1.7 km / s。这些恒星参数用于合成K波段光谱以与观测值进行比较。相对于非磁性模型中产生的线,对磁敏感的Ti I线都显着加宽,而对磁性不敏感的CO线与基本的非磁性模型很好地匹配。具有磁场的模型被合成并适合Ti I线。最佳拟合模型表明,恒星表面的磁场强度分布为2.51 +/- 0.18 kG的平均磁场强度。平均场比压力均分参数预测的最大场强大2.0倍。为了确认这种强磁场的真实性,我们尝试使用两分量磁性模型对观测到的轮廓进行拟合,其中磁场强度被限制为代表一个分量中类似小块状区域的等分值,并且允许磁场变化代表斑点的较凉的组件。结果表明,这种模型与7055埃的TiO带头的光谱不一致。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号