In order to predict the mechanical behavior of the LHC dipole cold mass in situations such as handling, transport and cool down, a number of important structural parameters are required. The dipole's flexural rigidity determines entirely the mechanical elastic behavior of the cold mass. Therefore, models of a bent cold mass were created to calculate its rigidity. This paper presents a simplified parametric finite element model, created to study the deflection of the cold mass in different situations and supporting conditions. The sensitivity of the models to the supporting conditions is computed. To provide the finite element and the analytical models with input, the deflection of the cold mass under discrete loads in normal condition and then 90-degrees rotated were measured with a laser tracker. By comparing models with measurements, the vertical and transversal rigidity of the cold mass assembly are determined. Additionally, the paper reports on the plastic behavior of the cold mass assembly in the range of the deformations that are needed to correct cold masses that result, after final welding of the outer skin, with unacceptable sagitta.
展开▼
