首页> 外文OA文献 >Vortex-Induced Injectable Silk Fibroin Hydrogels
【2h】

Vortex-Induced Injectable Silk Fibroin Hydrogels

机译:涡流诱导注射丝素蛋白水凝胶

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A novel, to our knowledge, technique was developed to control the rate of β-sheet formation and resulting hydrogelation kinetics of aqueous, native silk solutions. Circular dichroism spectroscopy indicated that vortexing aqueous solutions of silkworm silk lead to a transition from an overall protein structure that is initially rich in random coil to one that is rich in β-sheet content. Dynamic oscillatory rheology experiments collected under the same assembly conditions as the circular dichroism experiments indicated that the increase in β-sheet content due to intramolecular conformational changes and intermolecular self-assembly of the silk fibroin was directly correlated with the subsequent changes in viscoelastic properties due to hydrogelation. Vortexing low-viscosity silk solutions lead to orders-of-magnitude increase in the complex shear modulus, G∗, and formation of rigid hydrogels (G∗ ≈ 70 kPa for 5.2 wt % protein concentration). Vortex-induced, β-sheet-rich silk hydrogels consisted of permanent, physical, intermolecular crosslinks. The hydrogelation kinetics could be controlled easily (from minutes to hours) by changing the vortex time, assembly temperature and/or protein concentration, providing a useful timeframe for cell encapsulation. The stiffness of preformed hydrogels recovered quickly, immediately after injection through a needle, enabling the potential use of these systems for injectable cell delivery scaffolds.
机译:据我们所知,开发了一种新颖的技术来控制β-片层形成的速率以及由此产生的天然蚕丝水溶液的水凝胶动力学。圆二色性光谱表明,将蚕丝的水溶液涡旋导致从最初富含无规卷曲的整体蛋白质结构过渡到富含β-折叠含量的蛋白质结构。在与圆二色性实验相同的组装条件下收集的动态振荡流变学实验表明,由于丝纤蛋白的分子内构象变化和分子间自组装,β-片层含量的增加与随后的粘弹性的变化直接相关。水凝胶化。涡旋低粘度丝溶液会导致复数剪切模量G *数量级增加,并形成刚性水凝胶(对于5.2 wt%的蛋白质浓度,G *≈70 kPa)。涡旋诱导的富含β-折叠的丝水凝胶由永久的,物理的,分子间的交联组成。通过改变涡旋时间,组装温度和/或蛋白质浓度,可以轻松控制水凝胶动力学(从数分钟到数小时),从而为细胞封装提供了有用的时间框架。通过针头注射后,预制的水凝胶的刚度很快恢复,从而使这些系统有可能用于可注射的细胞递送支架。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号