首页> 外文OA文献 >Scatter rejection and low-contrast performance of a slot-scan digital chest radiography system with electronic aft-collimation: A chest phantom study
【2h】

Scatter rejection and low-contrast performance of a slot-scan digital chest radiography system with electronic aft-collimation: A chest phantom study

机译:具有电子后置准直的缝隙扫描数字胸部放射线照相系统的散射抑制和低对比度性能:一项人体模型研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Anti-scatter grids have been widely used to reject scatter and increase the perceptibility of low-contrast object in chest radiography; however they also attenuate the primary x-rays, resulting in a substantial degradation of primary information. Compensation for this degradation requires the use of higher exposure technique hence higher dose to the patient. A more efficient approach to reject scatter is the slot-scan imaging technique which employs a narrow scanning x-ray fan beam in conjunction with a slit or slot shaped solid state detector or an area detector used with an aft-collimator. With this approach, scatter can be rejected effectively without the need to attenuate primary x-rays. This paper demonstrates an electronic aft-collimation method, referred to as the alternate line erasure and readout (ALER) technique, for implementing the slot-scan digital radiography with a modern flat-panel detector. With this technique, instead of first exposing the detector and then reading the image line by line, the image line on the leading edge of the scanning fan beam is reset to erase the scatter accumulated prior to the arrival of the fan beam x-rays, while the image line on the trailing edge of the scanning fan beam is read out to acquire the image signals following the fan-beam exposure. These reset and readout processes are alternated and repeated as the x-ray fan beam scans across the detector. An anthropomorphic chest phantom was imaged to evaluate the scatter rejection ability and the low-contrast performance for the ALER technique and compare them with those for the anti-scatter grid method in full-field chest imaging. With a projected beam width of 16 mm, the slot-scan∕ALER technique resulted in an average reduction of the scatter-to-primary ratios by 81%, 84%, 82%, and 86% versus 65%, 73%, 74%, and 73% with the anti-scatter grid method in the lungs, mediastinum, retrocardium, and subdiaphragm, respectively. The average CNR for the slot-scan∕ALER technique was found to improve by 135%, 133%, 176%, and 87% versus 15%, 15%, 38%, and −11% with the anti-scatter grid method in the mediastinum, retrocardium, subdiaphragm, and lungs, respectively. These results demonstrated that the slot-scan∕ALER technique can be used to achieve equally effective scatter rejection but substantially higher low-contrast performance than the anti-scatter grid method.
机译:防散射网格已被广泛用于拒绝散射并提高胸部X线摄影中低对比度物体的可感知性。但是,它们也会衰减主要的X射线,从而导致主要信息的质量大大下降。对于这种降解的补偿需要使用更高的暴露技术,因此需要给患者更高的剂量。拒绝散射的更有效方法是缝隙扫描成像技术,该技术将窄扫描X射线扇形光束与缝隙或缝隙形固态检测器或后准直仪一起使用的区域检测器结合使用。使用这种方法,可以有效地抑制散射,而无需衰减初级X射线。本文演示了一种电子后置准直方法,称为交替线擦除和读出(ALER)技术,用于使用现代平板探测器实现缝隙扫描数字射线照相。使用这种技术,取代先暴露检测器然后逐行读取图像的方法,重置扫描扇形光束前端上的图像线以消除在扇形束X射线到达之前累积的散射,扫描扇形光束后缘上的图像线被读出,以获取扇形光束曝光后的图像信号。当X射线扇形光束扫过检测器时,这些重置和读出过程会交替并重复。对拟人化的人体模型进行成像,以评估ALER技术的散射抑制能力和低对比度性能,并将其与全视野胸部成像中的抗散射网格方法进行比较。使用16 mm的投影光束宽度时,狭缝扫描∕ ALER技术使散射与主要比率平均降低了81%,84%,82%和86%,而平均降低了65%,73%,74使用防散射网格方法分别在肺,纵隔,心后膜和下sub膜中分别占50%和73%。发现使用狭缝扫描∕ ALER技术的平均CNR分别提高了135%,133%,176%和87%,而使用反散射网格方法的平均CNR分别提高了15%,15%,38%和-11%。分别为纵隔,心后膜,dia下和肺。这些结果表明,缝隙扫描∕ ALER技术可用于实现同样有效的散射抑制,但比反散射网格方法具有更高的低对比度性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号