首页> 外文OA文献 >A new miniature hydrostatic pressure chamber for microscopy. Strain- free optical glass windows facilitate phase-contrast and polarized- light microscopy of living cells. Optional fixture permits simultaneous control of pressure and temperature
【2h】

A new miniature hydrostatic pressure chamber for microscopy. Strain- free optical glass windows facilitate phase-contrast and polarized- light microscopy of living cells. Optional fixture permits simultaneous control of pressure and temperature

机译:用于显微镜的新型微型静水压力室。无应变的光学玻璃窗可促进活细胞的相差和偏振光显微镜检查。可选的夹具允许同时控制压力和温度

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This paper describes the development of a miniature, temperature- controlled, stainless steel pressure chamber which uses strain-free optical glass for windows. It is directly adaptable to standard phase- contrast and polarized-light microscopes and requires a minimum amount of equipment to generate and measure pressure. Birefringence retardation (BR) og 0.1 nm up to 3,000 psi, 0.4 nm up to 5,000 psi and 1.0 nm up to 10,000 psi can be detected over a 0.75-mm central field with two strain-free Leitz 20 times UM objectives, one used as a condenser. In phase-contrast studies a Nikon DML 40 times phase objective and Zeiss model IS long working-distance phase condenser were used, with little deterioration of image quality or contrast at pressures as high as 12,000 psi. The actual design process required a synthesis of various criteria which may be categorized under four main areas of consideration: (a) specimen physiology; (b) constraints imposed by available optical equipment and standard microscope systems; (c) mechanical strength and methods for generating pressure; and (d) optical requirements of the chamber windows. Procedures for using the chambers, as well as methods for shifting and controlling the temperature within the chamber, are included.
机译:本文介绍了一种微型,温度可控的不锈钢压力室的开发,该压力室使用了无应变的光学玻璃作为窗户。它直接适用于标准相衬显微镜和偏光显微镜,并且需要最少的设备来生成和测量压力。可以在0.75mm的中心场上检测到0.1 nm最高3,000 psi的双折射延迟(BR),0.1 nm最高5,000 psi的1.0 nm和1.0 nm最高10,000 psi的双折射延迟,这两个Leitz是20倍UM物镜,这是无应变的冷凝器。在相衬研究中,使用了尼康DML 40倍物镜和Zeiss model IS长工作距离相聚光镜,在高达12,000 psi的压力下,图像质量或对比度几乎没有下降。实际的设计过程需要综合各种标准,这些标准可以分为四个主要考虑领域:(a)标本生理; (b)现有光学设备和标准显微镜系统施加的限制; (c)机械强度及产生压力的方法; (d)室窗的光学要求。包括使用腔室的程序以及移动和控制腔室内温度的方法。

著录项

  • 作者

  • 作者单位
  • 年度 1975
  • 总页数
  • 原文格式 PDF
  • 正文语种 {"code":"en","name":"English","id":9}
  • 中图分类

相似文献

  • 外文文献
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号