Experimental investigations of polymer hollow fibre heat exchangers for building heat recovery application

摘要

Due to low cost, light weight and corrosion resistant features, polymer heat exchangers have been extensively studied by researchers with the aim to replace metallic heat exchangers in a wide range of applications. Although the thermal conductivity of polymer material is generally lower than the metallic counterparts, the large specific surface area provided by the polymer hollow fibre heat exchanger (PHFHE) offers the same or even better heat transfer performance with smaller volume and lighter weight compared with the metallic shell-and-tube heat exchangers. This paper presents the construction and experimental investigations of polypropylene based polymer hollow fibre heat exchangers in the form of shell-and-tube. The measured overall heat transfer coefficients of such PHFHEs are in the range of 258–1675 W/m2K for water to water application. The effects of various parameters on the overall heat transfer coefficient including flow rates and numbers of fibres, the effectiveness of heat exchanger, the number of heat transfer unit (NTU), and the height of transfer unit (HTU) are also discussed in this paper. The results indicate that the PHFHEs could offer a conductance per unit volume of 4 × 106 W/m3K, which is 2–8 times higher than the conventional metal heat exchangers. This superior thermal performance together with its low cost, corrosive resistant and light weight features make PHFHEs potentially very good substitutes for metallic heat recovery system for building application.