首页> 外文OA文献 >Pediatric wheelchair and headrest design guidelines and the effect of headrests on relative injury risk under rear impact conditions
【2h】

Pediatric wheelchair and headrest design guidelines and the effect of headrests on relative injury risk under rear impact conditions

机译:儿科轮椅和头枕设计指南以及头枕对后部撞击条件下相对伤害风险的影响

摘要

The role that wheelchairs and wheelchair mounted headrests play in rear impact occupant protection for children who remain seated in wheelchairs while traveling in motor vehicles was investigated using sled testing and computer simulation. Study goals were to establish pediatric wheelchair and headrest design guidelines and to determine the effect of headrests on relative injury risk outcome measures under rear impact conditions. Two series of sled tests (16 mph, 11g) were conducted using a Hybrid III 6-year old anthropomorphic test device (ATD) seated in identically configured manual pediatric wheelchairs, with and without headrests. Wheelchairs remained intact and the ATD remained upright. Rear impact front wheelchair securement points were subjected to loads similar to previously described (Ha, DongRan, 2004) rear securement points in frontal impact, although Ha used the more severe 30mph, 20g frontal impact WC19 - Wheelchairs Used as Seats in Motor Vehicles (ANSI/RESNA, 2000) crash pulse. Sled test ATD data analysis indicated that wheelchair headrest use had a potentially protective effect based on pediatric head and neck injury risk outcomes. Sled test data established response corridors for MADYMO computer simulation model development, and defined statistical test target thresholds for model validation. Two simulation models were developed, with and without a headrest. The models validated well for tiedown loads, wheelchair acceleration, lap belt loads and chest acceleration. Outcomes related to head and neck response were not as strongly validated. Model ATD neck response characterization methods were developed. Finally, parametric sensitivity analyses were used to develop wheelchair and headrest design guidelines for pediatric manual wheelchairs in rear impact for front securement point loads, rear wheel loads and seatback loads. Pediatric injury outcome measure sensitivity to wheelchair, headrest and crash pulse parameters was evaluated. Neck injury criteria (Nij) was sensitive to headrest placement; resulting recommendations specify placing the headrest as close as possible to the back of the head, and top of the headrest pad should be at least 5 cm above the head center of gravity. Effects of stiffer 6-year old ATD neck response on injury risk outcome measures were evaluated and found to reduce likelihood of severe neck injury.
机译:使用雪橇测试和计算机仿真研究了轮椅和安装在轮椅上的头枕在汽车行驶过程中仍坐在轮椅上的儿童的后撞乘员保护中的作用。研究目标是建立儿科轮椅和头枕设计指南,并确定头枕对后方撞击条件下相对伤害风险结果度量的影响。使用安装在配置相同的手动小儿轮椅上(带或不带头枕)的Hybrid III 6岁的拟人化测试设备(ATD)进行了两个系列的雪橇测试(16 mph,11 g)。轮椅保持完好无损,ATD保持直立。后部碰撞前轮椅固定点承受的载荷与前面所述(Ha,DanRan,2004年)的前部碰撞中相似的载荷,尽管Ha使用了更为严重的30mph,20g的正面碰撞WC19-用作汽车座椅的轮椅(ANSI / RESNA,2000年)崩溃脉冲。雪橇测试ATD数据分析表明,根据儿科头部和颈部受伤的风险结果,使用轮椅头枕有潜在的保护作用。雪橇测试数据为MADYMO计算机仿真模型开发建立了响应通道,并为模型验证定义了统计测试目标阈值。开发了两个仿真模型,带有和不带有头枕。该模型对于束紧负荷,轮椅加速度,腰带负荷和胸部加速度进行了很好的验证。与头颈部反应有关的结果并未得到充分验证。开发了模型ATD颈部反应表征方法。最后,使用参数敏感性分析为后方撞击中的小儿手动轮椅开发轮椅和头枕设计指南,以应对前固定点载荷,后轮载荷和座椅靠背载荷。评估了儿科损伤预后对轮椅,头枕和碰撞脉冲参数的敏感性。颈部损伤标准(Nij)对头枕放置很敏感。由此产生的建议指定将头枕放置在尽可能靠近头后部的位置,并且头枕垫的顶部应在头重心上方至少5厘米的位置。评估了较硬的6岁ATD颈部反应对伤害风险结果指标的影响,发现该方法可减少严重颈部伤害的可能性。

著录项

  • 作者

    Fuhrman Susan Issen;

  • 作者单位
  • 年度 2009
  • 总页数
  • 原文格式 PDF
  • 正文语种 en
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号