The presence of cracks in a structure is usually detected by adopting a linear approach through the monitoring of changes in its dynamic response features, such as natural frequencies and mode shapes. But these linear vibration procedures do not always come up to practical results because of their inherently low sensitivity to defects. Since a crack introduces non-linearities in the system, their use in damage detection merits to be investigated. With this aim the present paper is devoted to analysing the peculiar features of the non-linear response of a cracked beam. The problem of a cantilever beam with an asymmetric edge crack subjected to a harmonic forcing at the tip is considered as a plane problem and is solved by using two-dimensional finite elements; the behaviour of the breathing crack is simulated as a frictionless contact problem. The modification of the response with respect to the linear one is outlined: in particular, excitation of sub- and super-harmonics, period doubling, and quasi-impulsive behaviour at crack interfaces are the main achievements. These response characteristics, strictly due to the presence of a crack, can be used in non-linear techniques of crack identification.
展开▼
