首页> 外文OA文献 >Docosahexaenoic Acid Ethyl Esther (dhaee) Microcapsule Production By Spray-drying: Optimization By Experimental Design [obtenção De Microcápsulas Do éster Etílico Do ácido Docosa-hexaenoico (dhaee) Por Atomização: Otimização Através De Planejamento Experimental]
【2h】

Docosahexaenoic Acid Ethyl Esther (dhaee) Microcapsule Production By Spray-drying: Optimization By Experimental Design [obtenção De Microcápsulas Do éster Etílico Do ácido Docosa-hexaenoico (dhaee) Por Atomização: Otimização Através De Planejamento Experimental]

机译:喷雾干燥生产二十二碳六烯酸乙酯(dhaee)微胶囊:通过实验设计进行优化

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Docosahexaenoic acid is an essential polyunsaturated fatty acid with important metabolic activities. Its conjugated double bonds make it susceptible to decomposition. Its stability may be improved through fatty acid entrapment with a spray-drying technique; however, the many parameters involved in this technique must be considered to avoid affecting the final product quality. Therefore, this study aimed to evaluate the entrapment conditions and yields of fish oil enriched with docosahexaenoic acid ethyl ester. Microcapsules were obtained from Acacia gum using a spray-drying technique. The experimental samples were analyzed by chromatography and delineated by Statistica software, which found the following optimum entrapment conditions: an inlet temperature of 188 °C; 30% core material; an N 2 flow rate of 55 mm; and a pump flow rate of 12.5 mL/minute. These conditions provided a 66% yield of docosahexaenoic acid ethyl ester in the oil, corresponding to 19.8% of entrapped docosahexaenoic acid ethyl ester (w/w). This result was considered significant since 30% corresponded to wall material.
机译:二十二碳六烯酸是一种重要的多不饱和脂肪酸,具有重要的代谢活性。它的共轭双键使其易于分解。通过用喷雾干燥技术截留脂肪酸可以提高其稳定性。但是,必须考虑此技术涉及的许多参数,以避免影响最终产品的质量。因此,本研究旨在评估富含二十二碳六烯酸乙酯的鱼油的包封条件和产量。使用喷雾干燥技术从金合欢胶获得微胶囊。通过色谱法分析实验样品,并通过Statistica软件进行描述,该方法发现以下最佳包封条件:入口温度为188°C;进样口温度为188°C。核心材料占30%; N 2流量为55毫米;泵的流速为12.5 mL /分钟。这些条件在油中提供了二十二碳六烯酸乙酯的66%的产率,对应于19.8%的截留的二十二碳六烯酸乙酯(w / w)。该结果被认为是有意义的,因为30%对应于壁材料。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号