首页> 外文OA文献 >Experimental Study for Swelling Ratio and Pressure of Water Swelling Material as an Impermeable Material
【2h】

Experimental Study for Swelling Ratio and Pressure of Water Swelling Material as an Impermeable Material

机译:作为非渗透材料的水溶胀材料的溶胀率和压力的实验研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A water swelling material is one of the rubbery impermeable materials which mixed synthetic resin elastomers as a base material, high absorbency polymers, filler and solvents. In this study, swelling characteristics of the water swelling material on the water polluted with COD and BOD, as an impermeable material at coastal waste landfill site, are examined by laboratory swelling ratio test. Furthermore, the factor in which it influences the swelling pressure of water swelling material is clarified by measuring the swelling pressure. As the results, the COD nor the BOD concentrations in the soaked water influence the swelling ratio of the water swelling material. When the thicknesses of water swelling material are 2 and 3mm, the maximum swelling pressure of 0.5 and 0.7MPa that correspond to hydraulic pressure by depth of 50 and 70 m is possessed, respectively.
机译:水溶胀材料是将合成树脂弹性体作为基础材料,高吸收性聚合物,填料和溶剂混合而成的橡胶状不可渗透材料之一。在这项研究中,通过实验室溶胀率测试,研究了在沿海垃圾填埋场中被COD和BOD污染的水作为非渗透性材料的水溶胀材料的溶胀特性。此外,通过测量溶胀压力来明确影响水溶胀材料的溶胀压力的因素。结果,浸泡水中的COD或BOD浓度影响水溶胀材料的溶胀率。当水溶胀材料的厚度为2mm和3mm时,分别具有对应于液压深度为50m和70m的最大溶胀压力为0.5MPa和0.7MPa。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号