首页> 外文OA文献 >Comparing a thermo-mechanical Weichselian Ice Sheet reconstruction to reconstructions based on the sea level equation : aspects of ice configurations and glacial isostatic adjustment
【2h】

Comparing a thermo-mechanical Weichselian Ice Sheet reconstruction to reconstructions based on the sea level equation : aspects of ice configurations and glacial isostatic adjustment

机译:比较热机械Weichselian冰盖重建与基于海平面方程的重建:冰构造和冰川等静压调整的方面

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In this study we compare a recent reconstruction of the Weichselian Ice Sheet as simulated by the University of Maine ice sheet model (UMISM) to two reconstructions commonly used in glacial isostatic adjustment (GIA) modelling: ICE-5G and ANU (Australian National University, also known as RSES). The UMISM reconstruction is carried out on a regional scale based on thermo-mechanical modelling, whereas ANU and ICE-5G are global models based on the sea level equation. The three models of the Weichselian Ice Sheet are compared directly in terms of ice volume, extent and thickness, as well as in terms of predicted glacial isostatic adjustment in Fennoscandia. The three reconstructions display significant differences. Whereas UMISM and ANU includes phases of pronounced advance and retreat prior to the last glacial maximum (LGM), the thickness and areal extent of the ICE-5G ice sheet is more or less constant up until the LGM. During the post-LGM deglaciation phase ANU and ICE-5G melt relatively uniformly over the entire ice sheet in contrast to UMISM, which melts preferentially from the edges, thus reflecting the fundamental difference in the reconstruction scheme. We find that all three reconstructions fit the present-day uplift rates over Fennoscandia equally well, albeit with different optimal earth model parameters. Given identical earth models, ICE-5G predicts the fastest present-day uplift rates, and ANU the slowest. Moreover, only for ANU can a unique best-fit model be determined. For UMISM and ICE-5G there is a range of earth models that can reproduce the present-day uplift rates equally well. This is understood from the higher present-day uplift rates predicted by ICE-5G and UMISM, which result in bifurcations in the best-fit upper-and lower-mantle viscosities. We study the areal distributions of present-day residual surface velocities in Fennoscandia and show that all three reconstructions generally over-predict velocities in southwestern Fennoscandia and that there are large differences in the fit to the observational data in Finland and northernmost Sweden and Norway. These difference may provide input to further enhancements of the ice sheet reconstructions.
机译:在这项研究中,我们将缅因州大学冰盖模型(UMISM)模拟的Weichselian冰盖的最新重建与冰川等静压调整(GIA)建模中常用的两种重建:ICE-5G和ANU(澳大利亚国立大学,也称为RSES)。 UMISM重建是基于热力学建模在区域尺度上进行的,而ANU和ICE-5G是基于海平面方程的全局模型。 Weichselian Ice Sheet的三个模型直接根据冰量,范围和厚度以及芬诺斯坎迪亚的预计冰川等静压调节进行了比较。三种重建显示出显着差异。尽管UMISM和ANU包括在最后一次冰期最大值(LGM)之前明显进退的阶段,但直到LGM为止,ICE-5G冰盖的厚度和面积范围或多或少是恒定的。在LGM的后冰期阶段,与UMISM相比,ANU和ICE-5G在整个冰原上相对均匀地融化,而UMISM则优先从边缘融化,因此反映出重建方案的根本差异。我们发现,尽管有不同的最佳地球模型参数,但所有三个重建都很好地适合了当前在Fennoscandia的隆升速率。在给定相同地球模型的情况下,ICE-5G预测当今最快的上升速度,而ANU预测最慢。而且,仅对于ANU才能确定唯一的最佳拟合模型。对于UMISM和ICE-5G,有多种地球模型可以很好地再现当今的上升速率。从ICE-5G和UMISM预测的当今更高的上升速度可以理解这一点,这会导致最合适的上,下地幔粘度分叉。我们研究了芬诺斯坎迪亚(Fennoscandia)当前残余表面速度的面积分布,并显示所有这三个重建总体上都夸大了西南芬诺斯坎迪亚的速度,并且与芬兰以及最北端的瑞典和挪威的观测数据的拟合度存在较大差异。这些差异可以为冰盖重建的进一步增强提供输入。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号