Particle-based Sb distribution model for Cu–Pb flotation as part of geometallurgical modelling at the polymetallic Rockliden deposit, north-central Sweden

摘要

The polymetallic Cu–Zn ore of the Rockliden massive sulphide deposit in the Skellefte District in north-central Sweden contains a number of deleterious elements in relevant concentrations. Of particular concern is the amount of antimony (Sb) reporting to the Cu–Pb concentrate. The aim of this study was to compare different model options to simulate the distribution of Sb minerals in a laboratory flotation test based on different degrees of details in the mineralogical information of the flotation feed. Experimental data obtained from four composites were used for the modelling and simulation. The following different simulation levels were run (sorted from least to highest level of detail of their mineralogical information): chemical assays, unsized bulk mineralogy, sized bulk mineralogy and particle information. It was shown that recoveries simulated based on bulk mineralogy are mostly within the error margin acceptable in the exploration stage of the Rockliden deposit. Unexpected high deviation in the simulation using particle information from the original recovery has been partly attributed to the fact that recovery of non-liberated particles cannot be modelled appropriately in the present version of the modelling and simulation software. It is expected that the implementation of full particle information in simulation will improve the Sb distribution model for the mineralogically complex Rockliden deposit.