首页> 外文OA文献 >Separation of Contaminants from Deinking Process Water by Dissolved Air Flotation: Effect of Flocculant Charge Density
【2h】

Separation of Contaminants from Deinking Process Water by Dissolved Air Flotation: Effect of Flocculant Charge Density

机译:溶解空气浮选法从脱墨工艺水中分离污染物:絮凝剂电荷密度的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The effect of charge density of 5 cationic polyacrylamides (C-PAMs)and 3 anionic polyacrylamides (A-PAMs) in single and in dual treatments with a coagulant on the flocculation and removal of dissolved and colloidal material by dissolved air flotation (DAF) in papermaking has been studied. In single systems, good results were achieved both with low and high charge C-PAMs(1.0and 3.0–3.5 meq/g). In dual sy tems, high charge C-PAMs (3.0–3.5 meq/g)and A-PAMs (1.5 meq/g), were the most efficient. Results show that monitoring flocculation by a focused beam reflectance measurement (FBRM) allows paermakers to optimize the chemical dosages to maximize the separation efficiency of DAF units either with single or dual systems, which is not always possible with traditional methods as charge titration.
机译:5种阳离子聚丙烯酰胺(C-PAM)和3种阴离子聚丙烯酰胺(A-PAM)的电荷密度在一次和两次凝结剂处理中对絮凝和通过溶解气浮法(DAF)去除溶解的胶体材料的影响已经研究了造纸。在单个系统中,低电荷C-PAM和高电荷C-PAM(1.0和3.0–3.5 meq / g)均获得了良好的结果。在双系统中,高电荷C-PAM(3.0-3.5 meq / g)和A-PAM(1.5 meq / g)效率最高。结果表明,通过聚焦光束反射率测量(FBRM)监测絮凝效果,造纸商可以优化化学剂量,以最大程度地利用单系统或双系统实现DAF单元的分离效率,而传统方法如电荷滴定通常无法实现。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号