首页> 外文OA文献 >Deformation Response of Unsymmetrically Laminated Plates Subjected to Inplane Loading
【2h】

Deformation Response of Unsymmetrically Laminated Plates Subjected to Inplane Loading

机译:平面内载荷作用下非对称层压板的变形响应

摘要

This paper discusses the out-of-plane deformation behavior of unsymmetric cross-ply composite plates compressed inplane by displacing one edge of the plate a known amount. The plates are assumed to be initially flat and several boundary conditions are considered. Geometrically nonlinear behavior is assumed. The primary objectives are to study the out-of-plane behavior as a function of increasing inplane compression and to determine if bifurcation behavior and secondary buckling can occur. It is shown that, depending on the boundary conditions, both can occur, though the characteristics are different than the pre and post-buckling behavior of a companion symmetric cross-ply plate. Furthermore, while a symmetric cross-ply plate can postbuckle with either a positive or negative out-of-plane displacement, the unsymmetric cross-ply plates studied deflect out-of-plane only in one direction throughout the range of inplane compression, the direction again depending on the boundary conditions
机译:本文讨论了通过将板的一个边缘位移已知量来将非对称交叉复合板压缩到平面内的平面外变形行为。假定板最初是平的,并考虑了几个边界条件。假定为几何非线性行为。主要目标是研究平面外行为与增加平面内压缩的关系,并确定是否会发生分叉行为和二次屈曲。结果表明,取决于边界条件,两者都可能发生,尽管其特性不同于配对对称交叉板的屈曲前后行为。此外,尽管对称的交叉板可以在正或负的平面外位移后屈曲,但研究的非对称交叉板仅在整个平面压缩范围内沿一个方向偏转平面外,即再次取决于边界条件

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号