首页> 外文OA文献 >Aerodynamic Performance of Scale-Model Turbofan Outlet Guide Vanes Designed for Low Noise
【2h】

Aerodynamic Performance of Scale-Model Turbofan Outlet Guide Vanes Designed for Low Noise

机译:专为低噪声设计的比例模型涡轮风扇出口导向叶片的空气动力学性能

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The design of effective new technologies to reduce aircraft propulsion noise is dependent on an understanding of the noise sources and noise generation mechanisms in the modern turbofan engine. In order to more fully understand the physics of noise in a turbofan engine, a comprehensive aeroacoustic wind tunnel test programs was conducted called the 'Source Diagnostic Test.' The text was cooperative effort between NASA and General Electric Aircraft Engines, as part of the NASA Advanced Subsonic Technology Noise Reduction Program. A 1/5-scale model simulator representing the bypass stage of a current technology high bypass ratio turbofan engine was used in the test. The test article consisted of the bypass fan and outlet guide vanes in a flight-type nacelle. The fan used was a medium pressure ratio design with 22 individual, wide chord blades. Three outlet guide vane design configurations were investigated, representing a 54-vane radial Baseline configuration, a 26-vane radial, wide chord Low Count configuration and a 26-vane, wide chord Low Noise configuration with 30 deg of aft sweep. The test was conducted in the NASA Glenn Research Center 9 by 15-Foot Low Speed Wind Tunnel at velocities simulating the takeoff and approach phases of the aircraft flight envelope. The Source Diagnostic Test had several acoustic and aerodynamic technical objectives: (1) establish the performance of a scale model fan selected to represent the current technology turbofan product; (2) assess the performance of the fan stage with each of the three distinct outlet guide vane designs; (3) determine the effect of the outlet guide vane configuration on the fan baseline performance; and (4) conduct detailed flowfield diagnostic surveys, both acoustic and aerodynamic, to characterize and understand the noise generation mechanisms in a turbofan engine. This paper addresses the fan and stage aerodynamic performance results from the Source Diagnostic Test.
机译:降低飞机推进噪声的有效新技术的设计取决于对现代涡扇发动机噪声源和噪声产生机理的理解。为了更充分地理解涡轮风扇发动机中噪声的物理性质,我们进行了称为“源诊断测试”的综合航空声风洞测试程序。该案文是NASA与通用电动飞机发动机公司之间的合作努力,是NASA先进的超音速技术降噪计划的一部分。测试中使用了1/5比例模型仿真器,该仿真器代表了当前技术的高旁路比涡轮风扇发动机的旁路级。测试物品由飞行型机舱中的旁路风扇和出口导向叶片组成。使用的风扇为中等压力比设计,带有22个单独的宽弦叶片。研究了三种出口导向叶片的设计配置,分别是54叶片的径向基线配置,26叶片的径向,宽弦低计数配置和26叶片的宽和弦低噪音配置(后掠角为30度)。该测试是在美国宇航局格伦研究中心9号由15英尺低速风洞进行的,其速度模拟了飞机飞行包络线的起飞和进近阶段。源诊断测试具有多个声学和空气动力学技术目标:(1)确定被选为代表当前技术涡轮风扇产品的比例模型风扇的性能; (2)使用三种不同的出口导向叶片设计分别评估风扇级的性能; (3)确定出口导向叶片配置对风扇基准性能的影响; (4)进行详细的声学和空气动力学流场诊断调查,以表征和了解涡轮风扇发动机的噪声产生机理。本文介绍了源诊断测试得出的风扇和舞台空气动力学性能结果。

著录项

  • 作者

    Hughes, Christopher E.;

  • 作者单位
  • 年度 2001
  • 总页数
  • 原文格式 PDF
  • 正文语种
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号