首页> 外文OA文献 >Hypersonic Aerodynamic Characteristics of a Proposed Single-Stage-To-Orbit Vehicle
【2h】

Hypersonic Aerodynamic Characteristics of a Proposed Single-Stage-To-Orbit Vehicle

机译:拟议的单阶段入轨飞行器的超音速空气动力学特性

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The hypersonic aerodynamic characteristics of a winged body concept representing a candidate single- stage-to-orbit vehicle which features wing tip fin controllers and elevon/body flap control surfa'Fs are predicted at points along a nominal trajectory for Mach numbers from 5 to 27 and angles of attack from 19 to 32 degrees. Predictions are derived from surface properties based on flow solvers for inviscid and viscous, laminar flows acting as a perfect gas, as a gas in chemical equilibrium and as a gas in chemical non- equilibrium. At a Mach number of 22, the lateral aerodynamic characteristics of the vehicle are determined based on an inviscid analysis at side slip angles of 2 and 4 degrees and 32 degrees angle of attack; a viscous analysis was carried out to determine the effect of gas chemistry model on surface pressure and to determine the incremental aerodynamics for control surface deflections. The results show that the longitudinal pitch characteristics of the baseline configuration, i.e., zero control surface deflections, are significantly altered by real gas chemistry at angles of attack greater than 30 degrees and Mach numbers greater than 9; and, that aerodynamics derived from inviscid solutions are of sufficient accuracy for preliminary analysis. Also, it is shown that a Mach number of 22, the choice of gas chemistry model has a large impact on surface pressure levels at highly localized regions on the vehicle and that the vehicle can be trimmed at control surface deflections less than 11 degrees.
机译:有翼飞机概念的高超音速空气动力学特征代表了候选单级入轨飞行器,该飞机具有翼尖鳍片控制器和elevon /车身襟翼控制面,在马赫数为5到27的标称轨迹上预测攻角从19度到32度基于流动性求解器的表面特性可得出预测,这些流动性求解器用于粘性和粘性层流,它们充当理想气体,处于化学平衡状态的气体和处于化学非平衡状态的气体。马赫数为22时,基于2和4度侧滑角和32度迎角的无粘性分析,确定了车辆的侧向空气动力学特性。进行了粘性分析,以确定气体化学模型对表面压力的影响,并确定了控制表面挠度的增量空气动力学。结果表明,当气体的迎角大于30度且马赫数大于9时,实际气体化学作用会显着改变基线配置的纵向螺距特性,即零控制面挠度。并且,从无粘性溶液中得出的空气动力学特性对于初步分析具有足够的准确性。此外,还表明,马赫数为22时,气体化学模型的选择对车辆高度局部区域的表面压力水平有很大影响,并且可以在控制表面挠度小于11度的情况下修整车辆。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号