首页> 外文OA文献 >A Model for Particle Microphysics,Turbulent Mixing, and Radiative Transfer in the Stratocumulus-Topped Marine Boundary Layer and Comparisons with Measurements
【2h】

A Model for Particle Microphysics,Turbulent Mixing, and Radiative Transfer in the Stratocumulus-Topped Marine Boundary Layer and Comparisons with Measurements

机译:层积丘顶海洋边界层中的粒子物理,湍流混合和辐射传输模型及与测量的比较

摘要

A detailed 1D model of the stratocumulus-topped marine boundary layer is described. The model has three coupled components: a microphysics module that resolves the size distributions of aerosols and cloud droplets, a turbulence module that treats vertical mixing between layers, and a multiple wavelength radiative transfer module that calculates radiative heating rates and cloud optical properties. The results of a 12-h model simulation reproduce reasonably well the bulk thermodynamics, microphysical properties, and radiative fluxes measured in an approx. 500-m thick, summertime marine stratocumulus cloud layer by Nicholls. However, in this case, the model predictions of turbulent fluxes between the cloud and subcloud layers exceed the measurements. Results of model simulations are also compared to measurements of a marine stratus layer made under gate conditions and with measurements of a high, thin marine stratocumulus layer. The variations in cloud properties are generally reproduced by the model, although it underpredicts the entrainment of overlying air at cloud top under gale conditions. Sensitivities of the model results are explored. The vertical profile of cloud droplet concentration is sensitive to the lower size cutoff of the droplet size distribution due to the presence of unactivated haze particles in the lower region of the modeled cloud. Increases in total droplet concentrations do not always produce less drizzle and more cloud water in the model. The radius of the mean droplet volume does not correlate consistently with drizzle, but the effective droplet radius does. The greatest impacts on cloud properties predicted by the model are produced by halving the width of the size distribution of input condensation nuclei and by omitting the effect of cloud-top radiative cooling on the condensational growth of cloud droplets. The omission of infrared scattering produces noticeable changes in cloud properties. The collection efficiencies for droplets less than 30-micron radius, and the value of the accommodation coefficient for condensational droplet growth, have noticeable effects on cloud properties. The divergence of the horizontal wind also has a significant effect on a 12-h model simulation of cloud structure. Conclusions drawn from the model are tentative because of the limitations of the 1D model framework. A principal simplification is that the model assumes horizontal homogeneity, and, therefore, does not resolve updrafts and downdrafts. Likely consequences of this simplification include overprediction of the growth of droplets by condensation in the upper region of the cloud, underprediction of droplet condensational growth in the lower region of the cloud, and under-prediction of peak supersaturations.
机译:描述了层积丘顶海洋边界层的详细一维模型。该模型具有三个耦合的组件:一个微物理模块,用于解析气溶胶和云滴的尺寸分布;湍流模块,用于处理各层之间的垂直混合;以及多波长辐射传输模块,用于计算辐射加热速率和云的光学特性。 12小时模型仿真的结果合理地再现了大约在20分钟内测得的整体热力学,微观物理性质和辐射通量。 Nicholls撰写的厚达500米的夏季海洋平流层云层。但是,在这种情况下,云层和子云层之间的湍流通量的模型预测超出了测量值。模型仿真的结果也与在闸门条件下进行的海相地层的测量值以及高而薄的海相层积云层的测量值进行了比较。尽管该模型低估了大风条件下云顶上夹带的空气的夹带,但该模型通常会再现其云特性的变化。探索了模型结果的敏感性。由于在模拟云的下部区域中存在未活化的雾状颗粒,因此云滴浓度的垂直分布对液滴尺寸分布的较低尺寸截断敏感。总液滴浓度的增加并不总是在模型中产生较少的毛毛雨和更多的云水。平均液滴体积的半径与毛毛雨并不一致,但有效液滴半径却有关系。通过将输入凝结核尺寸分布的宽度减半,并忽略云顶辐射冷却对云滴凝结生长的影响,可以对模型预测的云性能产生最大影响。省略红外散射会导致云的性质发生明显变化。半径小于30微米的液滴的收集效率,以及凝结液滴生长的调节系数的值,对云的性质有显着影响。水平风的发散对云结构的12小时模型模拟也有重要影响。由于一维模型框架的局限性,从模型中得出的结论是暂定的。一个主要的简化是该模型假定水平同质,因此不解决向上和向下的气流。这种简化的可能结果包括:通过预测云的上部区域中的凝结来液滴生长的过高预测,预测云的下部区域中的液滴凝结生长的预测过低以及峰值过饱和度的预测不足。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号