首页> 外文OA文献 >Simultaneous Laser Raman-rayleigh-lif Measurements and Numerical Modeling Results of a Lifted Turbulent H2/N2 Jet Flame in a Vitiated Coflow
【2h】

Simultaneous Laser Raman-rayleigh-lif Measurements and Numerical Modeling Results of a Lifted Turbulent H2/N2 Jet Flame in a Vitiated Coflow

机译:悬浮气流中同时产生湍流H2 / N2射流火焰的同时激光拉曼-瑞利-里夫测量和数值模拟结果

摘要

An experiment and numerical investigation is presented of a lifted turbulent H2/N2 jet flame in a coflow of hot, vitiated gases. The vitiated coflow burner emulates the coupling of turbulent mixing and chemical kinetics exemplary of the reacting flow in the recirculation region of advanced combustors. It also simplifies numerical investigation of this coupled problem by removing the complexity of recirculating flow. Scalar measurements are reported for a lifted turbulent jet flame of H2/N2 (Re = 23,600, H/d = 10) in a coflow of hot combustion products from a lean H2/Air flame ((empty set) = 0.25, T = 1,045 K). The combination of Rayleigh scattering, Raman scattering, and laser-induced fluorescence is used to obtain simultaneous measurements of temperature and concentrations of the major species, OH, and NO. The data attest to the success of the experimental design in providing a uniform vitiated coflow throughout the entire test region. Two combustion models (PDF: joint scalar Probability Density Function and EDC: Eddy Dissipation Concept) are used in conjunction with various turbulence models to predict the lift-off height (H(sub PDF)/d = 7,H(sub EDC)/d = 8.5). Kalghatgi's classic phenomenological theory, which is based on scaling arguments, yields a reasonably accurate prediction (H(sub K)/d = 11.4) of the lift-off height for the present flame. The vitiated coflow admits the possibility of auto-ignition of mixed fluid, and the success of the present parabolic implementation of the PDF model in predicting a stable lifted flame is attributable to such ignition. The measurements indicate a thickened turbulent reaction zone at the flame base. Experimental results and numerical investigations support the plausibility of turbulent premixed flame propagation by small scale (on the order of the flame thickness) recirculation and mixing of hot products into reactants and subsequent rapid ignition of the mixture.
机译:实验和数值研究提出了在热的,通风的气体同流中升起的湍流H2 / N2喷射火焰。通风的同流燃烧器模拟了湍流混合与化学动力学的耦合,该反应是高级燃烧器再循环区域中反应流的示例。通过消除循环流的复杂性,它还简化了对该耦合问题的数值研究。报告了从稀薄的H2 /空气火焰(空置)= 0.25,T = 1,045的热燃烧产物的同流中H2 / N2的湍流喷射火焰(Re = 23,600,H / d = 10)的标量测量结果。 K)。瑞利散射,拉曼散射和激光诱导的荧光的结合用于同时测量主要物质OH和NO的温度和浓度。数据证明了实验设计在整个测试区域内提供均匀的均质的同流的实验设计是成功的。两种燃烧模型(PDF:联合标量概率密度函数和EDC:涡流消散概念)与各种湍流模型一起用于预测升空高度(H(sub PDF)/ d = 7,H(sub EDC)/ d = 8.5)。 Kalghatgi的经典现象学理论基于比例论证,可得出当前火焰的升空高度的相当准确的预测(H(sub K)/ d = 11.4)。带有涡流的顺流器允许混合流体自动点火,并且这种抛物线形PDF模型在预测稳定的抬升火焰方面的成功归因于这种点火。测量结果表明火焰底部的湍流反应区变厚。实验结果和数值研究通过小规模(按火焰厚度的顺序)再循环和将热产物混入反应物中并随后迅速点燃混合物,证明了湍流预混火焰传播的合理性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号