首页> 外文OA文献 >Auto Ignition Temperature Test Chamber Fire Investigation

【2h】

Auto Ignition Temperature Test Chamber Fire Investigation

机译：自动点火温度试验箱火灾调查

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

No abstract available

机译：无摘要

著录项

作者
Tylka Jonathan;
展开▼
作者单位

展开▼
年度 2016
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Experimental and numerical investigation of vitiation effects on the auto-ignition of n-heptane at high temperatures [J] . Zhang Dexiang, Wang Yijun, Zhang Changhua, Energy . 2019,第MAYa1期

机译：偏析对高温正庚烷自燃影响的实验与数值研究
2. Experimental and numerical investigation of vitiation effects on the auto-ignition of n-heptane at high temperatures [J] . Zhang Dexiang, Wang Yijun, Zhang Changhua, Energy . 2019,第May1期

机译：高温下正庚烷自动点火的实验性和数值研究
3. Auto-ignition temperature and burning rate of potassium pool fire in a confined enclosure [J] . Kota Sampath Bharadwaj, Subramani A., Jayanti S. Combustion and Flame . 2016,第juna期

机译：密闭空间中钾池着火的自燃温度和燃烧速率
4. Auto Ignition Temperature Test Chamber Fire Investigation [C] . Jonathan M. Tylka, Timothy D. Gallus . 2016

机译：自动点火温度试验箱火灾调查
5. SPRAY IGNITION OF LIQUID FUELS AT HIGH PRESSURES AND TEMPERATURES AND THERMODYNAMIC PROPERTIES OF HEAVY HYDROCARBONS (AUTO, DIESEL, CORRESPONDING STATES). [D] . PARKER, TERENCE ELLIOTT. 1985

机译：高压高温下液体燃料的喷雾点火和重烃（自动，柴油，相应状态）的热力学性质。
6. Prediction of the Auto-Ignition Temperatures of Binary Miscible Liquid Mixtures from Molecular Structures [O] . Shijing Shen, Yong Pan, Xianke Ji, 2019

机译：从分子结构预测二元可混溶液体混合物的自燃温度
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。
8. Auto Ignition Temperature Test Chamber Fire Investigation. [R] . Tylka, J. 2016

机译：汽车点火温度试验箱火灾调查。

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有

客服微信
服务号