首页> 外文OA文献 >Sol-Gel Synthesis of La(0.6)Sr(0.4)CoO(3-x) and Sm(0.5)Sr(0.5)CoO(3-x) Cathode Nanopowders for Solid Oxide Fuel Cells
【2h】

Sol-Gel Synthesis of La(0.6)Sr(0.4)CoO(3-x) and Sm(0.5)Sr(0.5)CoO(3-x) Cathode Nanopowders for Solid Oxide Fuel Cells

机译:固体氧化物燃料电池La(0.6)Sr(0.4)CoO(3-x)和Sm(0.5)Sr(0.5)CoO(3-x)阴极纳米粉的溶胶凝胶合成

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Nanopowders of La(0.6)Sr(0.4)CoO(3-x) (LSC) and Sm(0.5)Sr(0.5)CoO(3-x) (SSC) compositions, which are being investigated as cathode materials for intermediate temperature solid oxide fuel cells (IT-SOFC) with La(Sr)Ga(Mg)O(3-x) (LSGM) as the electrolyte, were synthesized by low-temperature sol-gel method using metal nitrates and citric acid. Thermal decomposition of the citrate gels was followed by simultaneous DSC/TGA methods. Development of phases in the gels, on heat treatments at various temperatures, was monitored by x-ray diffraction. Solgel powders calcined at 550 to 1000 C consisted of a number of phases. Single perovskite phase La(0.6)Sr(0.4)CoO(3-x) or Sm(0.5)Sr(0.5)CoO(3-x) powders were obtained at 1200 and 1300 C, respectively. Morphological analysis of the powders calcined at various temperatures was done by scanning electron microscopy. The average particle size of the powders was approx.15 nm after 700 C calcinations and slowly increased to 70 to 100 nm after heat treatments at 1300 to 1400 C.
机译:La(0.6)Sr(0.4)CoO(3-x)(LSC)和Sm(0.5)Sr(0.5)CoO(3-x)(SSC)组合物的纳米粉体,正在研究用作中温固体的阴极材料以金属硝酸盐和柠檬酸通过低温溶胶-凝胶法合成了以La(Sr)Ga(Mg)O(3-x)(LSGM)为电解质的氧化物燃料电池(IT-SOFC)。柠檬酸盐凝胶的热分解之后是同时进行的DSC / TGA方法。通过各种温度下的热处理,通过X射线衍射监测凝胶中相的发展。在550至1000℃下煅烧的Solgel粉末由许多相组成。钙钛矿相La(0.6)Sr(0.4)CoO(3-x)或Sm(0.5)Sr(0.5)CoO(3-x)粉末分别在1200和1300 C下获得。通过扫描电子显微镜对在不同温度下煅烧的粉末进行形态分析。粉末在700 C煅烧后的平均粒径约为15 nm,在1300至1400 C的热处理后缓慢增加至70至100 nm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号