首页> 外文OA文献 >Athermal Energy Loss from X-rays Deposited in Thin Superconducting Films on Solid Substrates
【2h】

Athermal Energy Loss from X-rays Deposited in Thin Superconducting Films on Solid Substrates

机译:X射线沉积在固体基质上的超导薄膜中的非热能损失

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

When energy is deposited in a thin-film cryogenic detector, such as from the absorption of an X-ray, an important feature that determines the energy resolution is the amount of athermal energy that can be lost to the heat bath prior to the elementary excitation systems coming into thermal equilibrium. This form of energy loss will be position-dependent and therefore can limit the detector energy resolution. An understanding of the physical processes that occur when elementary excitations are generated in metal films on dielectric substrates is important for the design and optimization of a number of different types of low temperature detector. We have measured the total energy loss in one relatively simple geometry that allows us to study these processes and compare measurements with calculation based upon a model for the various di.erent processes. We have modeled the athermal phonon energy loss in this device by finding an evolving phonon distribution function that solves the system of kinetic equations for the interacting system of electrons and phonons. Using measurements of device parameters such as the Debye energy and the thermal di.usivity we have calculated the expected energy loss from this detector geometry, and also the position-dependent variation of this loss. We have also calculated the predicted impact on measured spectral line-shapes, and shown that they agree well with measurements. In addition, we have tested this model by using it to predict the performance of a number of other types of detector with di.erent geometries, where good agreement is also found.
机译:当能量例如通过吸收X射线沉积在薄膜低温检测器中时,确定能量分辨率的重要特征是在元素激发之前可以损失到热浴中的非热能数量系统达到热平衡。这种形式的能量损失将取决于位置,因此会限制检测器的能量分辨率。对介电基片上的金属膜中产生基本激发时发生的物理过程的理解,对于多种不同类型的低温检测器的设计和优化很重要。我们已经在一个相对简单的几何结构中测量了总的能量损失,这使我们能够研究这些过程并将测量结果与基于不同过程的模型的计算结果进行比较。我们通过找到演化的声子分布函数来模拟该设备中的非热声子能量损失,该函数解决了电子和声子相互作用系统的动力学方程组。通过使用设备参数(例如德拜能量和热扩散率)的测量,我们已经计算出了该探测器几何形状的预期能量损耗,以及该损耗的位置相关变化。我们还计算了对测得的谱线形状的预测影响,并表明它们与测量结果非常吻合。另外,我们通过使用该模型预测具有不同一致性的其他多种具有不同几何形状的检测器的性能来测试了该模型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号