首页> 外文OA文献 >The effect of alloying on the ordering processes in near-alpha titanium alloys
【2h】

The effect of alloying on the ordering processes in near-alpha titanium alloys

机译:合金化对近α钛合金中有序化过程的影响

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The substructure of near-alpha Ti-Al-Sn-Zr-Mo-Si alloys containing up to 12.5. at% aluminum was studied by transmission electron microscopy (TEM). It was shown that long-range order sections are formed at aging temperatures up to 500. °C in alloys, high in aluminum, and the ordered phase is formed by the nucleation and growth mechanism at 700. °C aging temperatures. Causes of changing the phase transformation mechanism have been discussed, and the relationship between the structure and properties of alloys, depending on modes of heat treatment has been analyzed. Also the influence of aluminides and silicides precipitation on the mechanical alloy properties after aging was examined. It was shown that the aluminide formation led to a slight hardening and a significant viscosity decrease. The silicide particles formation reduced the heat resistance properties, due to the depletion of the solid solution by silicon. © 2012 Elsevier B.V.
机译:含有多达12.5的近αTi-Al-Sn-Zr-Mo-Si合金的亚结构。通过透射电子显微镜(TEM)研究了at%的铝。结果表明,在高铝的合金中,时效温度高达500.°C时会形成长程有序截面,而在700.°C时效温度下,有序相是通过成核和生长机理形成的。讨论了改变相变机理的原因,并分析了取决于热处理方式的合金结构与性能之间的关系。还研究了铝化物和硅化物沉淀对时效后机械合金性能的影响。结果表明,铝化物的形成导致轻微的硬化和明显的粘度降低。由于硅耗尽了固溶体,硅化物颗粒的形成降低了耐热性。 ©2012 Elsevier B.V.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号