Seismic Analysis of Four-Story TIIR Building Using Equivalent Static Method

摘要

Developments in computer hardware and software have made analysis techniques that were formerly too expensive within the reach of most project budgets. Foremost among these has been equivalent static analysis. This method is beneficial for short story buildings. This approach defines a series of forces acting on a building to represent the effect of earthquake ground motion, typically defined by a seismic design response spectrum. It assumes that the building responds in its fundamental mode. For this to be true, the building must be low-rise and must not twist significantly when the ground moves. The response is read from a design response spectrum, given the natural frequency of the building (either calculated or defined by the building code). The applicability of this method is extended in many building codes by applying factors to account for higher buildings with some higher modes, and for low levels of twisting. To account for effects due to "yielding" of the structure, many codes apply modification factors that reduce the design forces (e.g. force reduction factors).