首页> 外文OA文献 >A Comparative Study of Effects on Characteristic Properties of FRP Composites When Exposed to Distilled Water, Nacl-Water Solution and Sea Water Separately
【2h】

A Comparative Study of Effects on Characteristic Properties of FRP Composites When Exposed to Distilled Water, Nacl-Water Solution and Sea Water Separately

机译:分别暴露于蒸馏水,Nacl水溶液和海水中对FRP复合材料特性性能影响的比较研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A comparative study of effects on characteristic properties of FRP composites when exposed to Distilled water, NaCl- water solution and sea water separately was done.Composite of E- glass fiber reinforced in epoxy resin (araldite LY556) in 40:60 weight ratios was used. Samples were immersed for 2, 4, and 8 days in the three mediums separately at 60°C and 95% humidity in a humid chamber. ILSS values were calculated using INSTRON 1195. It was found that all solutions marginally degraded the mechanical property this was mainly the result of polymer hydrolysis. The diffusivity was found to be maximum in case of 3.2% NaCl solution and minimum in sea water. The immersion in sea water had least affect on mechanical properties. As evidenced by SEM micrographs, the worst case of damage involved large amount of debonding and fiber pullout in case of 3.2% NaCl solution, while sea water least affecting the matrix.
机译:比较了分别暴露于蒸馏水,NaCl水溶液和海水中对FRP复合材料特性性能影响的比较研究。使用重量比为40:60的环氧树脂增强的E-玻璃纤维复合材料(芳纶LY556) 。将样品分别在60°C和95%湿度的潮湿室内的三种介质中分别浸没2、4和8天。使用INSTRON 1195计算ILSS值。发现所有溶液都略微降低了机械性能,这主要是聚合物水解的结果。发现在3.2%NaCl溶液中扩散系数最大,而在海水中扩散系数最小。浸泡在海水中对机械性能的影响最小。如SEM显微照片所证明的,最坏的情况是在3.2%NaCl溶液中发生大量的脱粘和纤维拉出,而海水对基质的影响最小。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号