Self-injection length in La0.7Ca0.3MnO3–YBa2Cu3O7−δ ferromagnet–superconductor multilayer thin films

摘要

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La0.7Ca0.3MnO3 (LCMO) and YBa2Cu3O7−δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on LaAlO3 (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, Ic, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a Jc of ~ 2 × 10^6 A/cm2, the LCMO side showed about half the value for the same thickness (1800 Å). The difference in Jc indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of Jc at two different thicknesses (1800 Å and 1500 Å) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ~ 900 Å. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO3 deposited by PLD on YBCO did not show any evidence of self-injection.