Natural gas spark ignition engine efficiency and NOx emission improvement using extreme exhaust gas recirculation enabled by partial reforming

摘要

Natural-gas (NG), spark ignition (SI) engines have widespread application in the power generation and upstream oil and gas industries. The manufacturers of these engines are being challenged to meet increasingly stringent nitrogen oxide (NOx) emission regulations without sacrificing fuel conversion efficiency. SI engines may be operated with air\u2013fuel mixtures lean of stoichiometric to achieve higher thermal efficiency and to reduce NOx emissions. Compared with new combustion strategies such as homogeneous charge compression ignition, however, lean SI combustion suffers from a somewhat limited tolerability to mixture dilution and high cyclic variations. Alternatively, NOx emissions may be reduced by using exhaust gas recirculation (EGR) to dilute a stoichiometric air\u2013fuel mixture. This paper investigates the application of reformer gas (RG) to enable a higher mixture dilution of an NG SI engine using EGR. It was found that RG enrichment allows an increase in the EGR dilution of a stoichiometric NG\u2013air mixture from 12 per cent to more than 35 per cent. The optimal level of RG enrichment directly compensates for the combustion phasing retardation effect of EGR. Increasing the RG fraction in the mixture beyond the optimal value adversely affected the combustion process and fuel conversion efficiency. The experimental data suggest that NOx emissions comparable with the forthcoming 2010 US Environmental Protection Agency heavy-duty diesel engine regulations may be achieved using EGR, RG enrichment, and a three-way catalytic converter (TWC). An energy balance showed that there is the potential to increase the overall system fuel conversion efficiency slightly owing to a more optimized combustion process after taking into account the energy losses associated with fuel reforming. The approach of EGR, fuel reforming, and a TWC is suitable for retrofits because it can be accomplished without modifying the engine geometry.