首页> 外文OA文献 >Low-thickness high-quality aluminum nitride films for super high frequency solidly mounted resonators
【2h】

Low-thickness high-quality aluminum nitride films for super high frequency solidly mounted resonators

机译:用于超高频固装谐振器的低厚度高质量氮化铝膜

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

We investigate the sputter growth of very thin aluminum nitride (AlN) films on iridium electrodes for electroacoustic devices operating in the super high frequency range. Superior crystal quality and low stress films with thicknesses as low as 160 nm are achieved after a radio frequency plasma treatment of the iridium electrode followed by a two-step alternating current reactive magnetron sputtering of an aluminum target, which promotes better conditions for the nucleation of well textured AlN films in the very first stages of growth. Solidly mounted resonators tuned around 8 GHz with effective electromechanical coupling factors of 5.8% and quality factors Q up to 900 are achieved.
机译:我们研究了在超高频范围内工作的电声设备的铱电极上非常薄的氮化铝(AlN)膜的溅射生长。在对铱电极进行射频等离子体处理,然后对铝靶材进行两步交流电控磁控溅射之后,可以获得质量优越的晶体质量和厚度低至160 nm的低应力膜,从而为铝的成核创造了更好的条件。在生长的最初阶段,质地良好的AlN膜。实现了在8 GHz左右调谐的固体谐振器,其有效的机电耦合系数为5.8%,品质因数Q高达900。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号