首页> 外文OA文献 >Prism coupling technique investigation of elasto-optical properties of thin polymer films
【2h】

Prism coupling technique investigation of elasto-optical properties of thin polymer films

机译:聚合物薄膜弹性光学特性的棱镜耦合技术研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The use of thin polymer films in optical planar integrated optical circuits is rapidly increasing. Much interest, therefore, has been devoted to characterizing the optical and mechanical properties of thin polymer films. This study focuses on measuring the elasto-optical properties of three different polymers; polystyrene, polymethyl-methacrylate, and benzocyclobutane. The out-of-plane elastic modulus, refractive index, film thickness, and birefringence of thin polymer films were determined by means of the prism coupling technique. The effect of the applied stress on the refractive index and birefringence of the films was investigated. Three-dimensional finite element method analysis was used so as to obtain the principal stresses for each polymer system, and combining them with the stress dependent refractive index measurements, the elasto-optic coefficients of the polymer films were determined. It was found that the applied stress in the out-of-plane direction of the thin films investigated leads to negative elasto-optic coefficients, as observed for all the three thin polymer films. © 2004 American Institute of Physics.
机译:光学平面集成光学电路中聚合物薄膜的使用正在迅速增加。因此,人们已经非常关注表征聚合物薄膜的光学和机械性能。这项研究的重点是测量三种不同聚合物的弹性光学性能。聚苯乙烯,聚甲基丙烯酸甲酯和苯并环丁烷。聚合物薄膜的平面外弹性模量,折射率,膜厚和双折射是通过棱镜耦合技术确定的。研究了施加的应力对薄膜的折射率和双折射的影响。使用三维有限元方法分析来获得每个聚合物系统的主应力,并将它们与应力相关的折射率测量值结合起来,以确定聚合物膜的弹性系数。已经发现,在所研究的薄膜的平面外方向上施加的应力导致负弹性系数,如对所有三个聚合物薄膜所观察到的。 ©2004美国物理研究所。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号