Formation of multilayered Ti-Hf-Si-N/NbN/Al2O3 coatings with high physical and mechanical properties

摘要

This work presents the first results on forming of multi-layered superhard coatings Ti-Hf-Si-N/NbN/Al2O3 and their properties as well as structure. Microstructure, elemental and phase compositions of multi-layered coatings obtained by different methods were investigated. There were used such methods as: scanning electron microscopy EDS JEM-7000F microscope (with microanalysis) for research of cross-section of coatings, with subsequent Auger-electron spectroscopy, X-ray diffraction analysis, optical inverted microscope Olympus GX51, electron-ion microscopes Quanta 200 3D and Quanta 600 (scanning electron microscopy), equipped by the detector of X-rayudradiation of the system PEGASUS 2000. It was stated that hardness of coatings has reached 56 GPa, and at theudsame time the factor of wearing during friction was the smallest 2.571x10(-5). It was also noted that nitrogenudpressure in the chamber at the deposition of the top layer significantly influences on the properties of samples. Forudexample, the coe cient of friction at P = 0:3 Pa from 0.2 at the beginning of track to 0.001 (during the tests), and at the pressure of nitrogen P = 0:8 Pa, the coefficient of friction was equal to 0.314 at the beginning of track and 0.384 at the end (during the tests).When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/33936