首页> 外文OA文献 >Complementary Split Ring Resonator Based Triple Band Microstrip Antenna for WLAN/WiMAX Applications
【2h】

Complementary Split Ring Resonator Based Triple Band Microstrip Antenna for WLAN/WiMAX Applications

机译:基于互补式分体式环形谐振器的三频段微带天线,用于WLAN / WiMAX应用

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

A new simple design of a triple-band microstrip antenna using metamaterial concept is presented in this paper. Multi-unit cell was the key of the multi resonance response that was obtained by etching two circular and one rectangular split ring resonator (SRR) unit cells in the ground plane of a conventional patch operating at 3.56 GHz .The circular unit cells are resonating at 5.6 GHz for the upper band of Wi-MAX, while the rectangular cell is designed to produce a resonance at 2.45 GHz for the lower band of WLAN. WiMAX's/WLAN's operating bands are covered by the triple resonances which are achieved by the proposed antenna with quite enhanced performance. A detailed parametric study of the placement for the metamaterial unit cells is introduced and the most suitable positions are chosen to be the place of the unit cells for enhanced performance. A good consistency between simulation and measurement confirms the ability of the proposed antenna to achieve an improved gain at the three different frequencies.
机译:本文提出了一种基于超材料概念的三频微带天线的新型简单设计。多单元电池是通过在工作于3.56 GHz的常规贴片的接地面上蚀刻两个圆形和一个矩形裂环谐振器(SRR)单元而获得的多谐振响应的关键。 Wi-MAX的较高频段为5.6 GHz,而矩形小区的设计则为WLAN的较低频段在2.45 GHz处产生谐振。 WiMAX / WLAN的工作频带被三重谐振所覆盖,该三重谐振是由拟议中的天线实现的,具有相当大的性能。引入了对超材料单元格放置的详细参数研究,并选择了最合适的位置作为单元格的位置,以增强性能。仿真和测量之间的良好一致性确认了所提出的天线在三个不同频率上实现改善增益的能力。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号