首页> 外文OA文献 >A Planar UWB Antenna with Switchable Single/Double Band-Rejection Characteristics
【2h】

A Planar UWB Antenna with Switchable Single/Double Band-Rejection Characteristics

机译:具有可切换单/双频带抑制特性的平面UWB天线

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In this Paper, a reconfigurable antenna with capability to operate in the ultrawideband (UWB) mode from 2.85 to 14.4 GHz with switchable notch bands of 3.25–4.26 GHz, 5.1–5.9 GHz or 7.1-7.8 GHz, is presented. The proposed antenna has a simple configuration and compact size of 17 × 14 mm2. To make the band-notches, three methods (methods of slot antenna, parasitic patches and backplane structure) are used. To achieve the reconfigurability, three PIN diode are placed on the proposed antenna. A PIN diode is inserted over the L-shaped parasitic element and the rectangular patch, another one is placed between the two parasitic elements on the ground plane, and other across the square ring-shaped slot, respectively. Antenna performance can be changed by adjusting the status of the PIN diodes that make the band-notches in applications bands (WLAN, WiMAX/C-band and X-band). Good group delay and monopole-like radiation pattern characteristics are achieved in the frequency band of interest. The antenna performance both by simulation and by experiment indicates that it is suitable and a good candidate for UWB applications.
机译:本文提出了一种可重构天线,该天线具有在2.85至14.4 GHz的超宽带(UWB)模式下工作的能力,并具有3.25–4.26 GHz,5.1–5.9 GHz或7.1-7.8 GHz的可切换陷波频段。所提出的天线结构简单,尺寸紧凑,仅为17×14 mm2。为了制作带隙,使用了三种方法(缝隙天线的方法,寄生贴片和底板结构)。为了实现可重构性,在建议的天线上放置了三个PIN二极管。将PIN二极管插入L形寄生元​​件和矩形贴片上,将另一个PIN放置在接地平面上的两个寄生元件之间,另一个分别跨过方形环形槽。可以通过调整PIN二极管的状态来改变天线性能,这些PIN二极管会在应用频带(WLAN,WiMAX / C频带和X频带)中产生频带缺口。在感兴趣的频带中可以实现良好的群时延和类单极辐射方向图特性。无论是通过仿真还是通过实验得出的天线性能均表明该天线适用于UWB应用,并且是该天线的理想选择。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号