首页> 外文OA文献 >Optimal Biomethane Injection into Natural Gas Grid – Biogas from Palm Oil Mill Effluent (POME) in Malaysia
【2h】

Optimal Biomethane Injection into Natural Gas Grid – Biogas from Palm Oil Mill Effluent (POME) in Malaysia

机译:向天然气网格中注入最佳生物甲烷气–马来西亚棕榈油厂废水(POME)中的沼气

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The Malaysian government aims to facilitate the renewable energy (RE) sector by introducing the National Renewable Energy Policy and Action Plan during 2010. 4,000 MW of installed RE capacity is targeted by 2030, with 410 MW biogas capacity. Palm oil mill effluent (POME), agro-based industries and farming industries are identified as potential sources of biogas. It was studied that more than 500 kt of biomethane could be produced yearly if all the POME is treated anaerobically. The utilization of biomethane has remained unexplored for its injection into natural gas grid. This papers aims to identify the potential of POME biomethane injection into natural gas grid by using the BeWhere model, a techno-economic spatial explicit model. The locations, capacity and technology of biogas refinery plants will be identified based on cost minimization of the full supply chain of biogas production. The result shows that 135 - 227 biogas plants were selected, supplying 40% - 67% residential fossil gas demand, under different carbon price implementation and fossil gas subsidy scenarios.
机译:马来西亚政府的目标是在2010年推出《国家可再生能源政策和行动计划》,以促进可再生能源(RE)领域的发展。到2030年,目标可再生能源装机容量为4,000 MW,沼气容量为410 MW。棕榈油厂废水(POME),农业产业和农业产业被确定为沼气的潜在来源。研究表明,如果对所有的POME进行厌氧处理,每年可生产500 kt以上的生物甲烷。对于将其注入天然气网,尚未充分利用生物甲烷的利用。本文旨在通过使用技术经济空间显式模型BeWhere模型确定将POME生物甲烷注入天然气网格的潜力。沼气精炼厂的位置,容量和技术将根据沼气生产整个供应链的成本最小化来确定。结果表明,在不同的碳价实施和化石燃料补贴情景下,选择了135-227个沼气厂,满足40%-67%的居民化石燃料需求。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号