首页> 外文OA文献 >Integrated Circuits Based on 300 GHz fT Metamorphic HEMT Technology for Millimeter-Wave and Mixed-Signal Applications
【2h】

Integrated Circuits Based on 300 GHz fT Metamorphic HEMT Technology for Millimeter-Wave and Mixed-Signal Applications

机译:基于300 GHz fT变形HEMT技术的集成电路,用于毫米波和混合信号应用

摘要

Advanced circuits based on metamorphic HEMT (MHEMT)technologies on 4 ”GaAs substrates for both millimeter-wave,and mixed- signal applications are presented.Extrinsic cut-off frequencies of ft =293 GHz and fmax =337 GHz were achieved for a 70 nm gate length metamorphic HEMT echnology.The MMIC process obtains high yield on transistor and circuit level.Single-stage low-noise amplifiers demonstrate a small signal gain of 13 dB and a noise figure of 2.8 dB at 94 GHz.An amplifier MMIC developed for D-Band operation features a gain of 15 dB at 160 GHz.The achieved results are comparable to state- of-the-art InP-based HEMT technologies.In order to realize 80 Gbit/s digital circuits,a process with 100 nm gate length enhancement type HEMTs with a transit frequency of 200 GHz is used.Three metalization layers are available for interconnects.The parasitic capacitance of the interconnects is kept low by using BCB and plated air bridge technology.Based on this process,static and dynamic frequency dividers achieve a maximu toggle frequency of 70 GHz and 108 GHz,respectively .
机译:提出了基于变态HEMT(MHEMT)技术的先进电路,该技术适用于毫米波和混合信号应用的4英寸GaAs衬底。在70 nm处实现了ft = 293 GHz和fmax = 337 GHz的外部截止频率门长度变质HEMT技术.MMIC工艺在晶体管和电路级上获得了很高的良率。单级低噪声放大器在94 GHz频率下具有13 dB的小信号增益和2.8 dB的噪声系数。 -频段工作在160 GHz时增益为15 dB。所获得的结果可与基于InP的最新HEMT技术相提并论。为了实现80 Gbit / s的数字电路,门长度为100 nm的过程使用过渡频率为200 GHz的增强型HEMT。互连层可使用三个金属化层。通过使用BCB和电镀气桥技术,互连层的寄生电容保持较低。在此过程中,静态和动态频率d分别达到70 GHz和108 GHz的最大触发频率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号