Définition, modélisation et validation expérimentale d’une capacité de stockage thermique par chaleur latente adaptée à une centrale thermodynamique solaire à basse température

摘要

This work of thesis is done within the framework of industrial agreements research training, between the company Sophia Antipolis Energie Développement (SAED) in Valbonne, and the Institut Matériaux Microélectronique Nanosciences de Provence (IM2NP) – CNRS – University Sud Toulon-Var.The aim of this collaboration is to investigate the technical and economic potential of various materials for thermal energy storage by latent heat, suitable for temperature levels of the solar collectors developed by SAED. Indeed, energy storage is a major technological barrier to the process resorting to intermittent renewable energies and especially for thermodynamic solar power plants.After an introduction on the potential and interest of solar power plants working at low temperature, a brief state of art of the main types of energy storage is presented. The second chapter addresses in detail the principle of thermal storage by latent heat and identifies a hundred of selected materials from the literature for phase change in the temperature range 343 - 413 K. The selection criteria are exposed.Thermal analyses by differential scanning calorimetry are carried out systematically on the various selected Phase Change Materials (PCMs). The results of these measurements, presented in chapter III, accurately characterize the material behavior when heated. The transformation on cooling is studied using a device specifically designed in order to be more representative of conditions found in an industrial enclosure. This study, presented in chapter IV, allows refining the selection of PCMs retaining only those whose phase change reversibility is compatible with an industrial use as medium for thermal energy storage. Chapters V and VI are used to study in further detail the specifics of two types of MCP, respectively polyols and eutectic mixtures of nitrates.Final chapter deals with the modeling of heat transfer into a storage tank containing encapsulated PCM. The aim is to provide a tool for predicting the performance of a latent heat storage unit, in order to analyze the influence of different options on the solar power plant energy yield and their impact on the kWh cost.