Optimization of struvite precipitation in synthetic biologically treated swine wastewater - Determination of the optimal process parameters

摘要

A sustainable way to recover phosphorus (P) in swine wastewater involves a preliminary step of P dissolution followed by the separation of particulate organic matter. The next two steps are firstly the precipitation of struvite crystals done by adding a crystallization reagent (magnesia) and secondly the filtration of the crystals. A design of experiments with five process parameters was set up to optimize the size of the struvite crystals in a synthetic swine wastewater. More than 90% of P was recovered as large crystals of struvite in optimal conditions which were: low Mg:Ca ratio (2.25:1), the leading parameter, high N:P ratio (3:1), moderate stirring rate (between 45 and 90 rpm) and low temperature (below 20°C). These results were obtained despite the presence of a large amount of calcium and using a cheap reactant (MgO). The composition of the precipitates was identified by Raman analysis and solid dissolution. Results showed that amorphous calcium phosphate (ACP) co-precipitated with struvite and that carbonates were incorporated with solid fractions.