首页> 外文OA文献 >Unravelling a simple method for the low temperature synthesis of silicon nanocrystals and monolithic nanocrystalline thin films
【2h】

Unravelling a simple method for the low temperature synthesis of silicon nanocrystals and monolithic nanocrystalline thin films

机译:揭示一种低温合成硅纳米晶体和单片纳米晶体薄膜的简单方法

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In this work, we present new results on the plasma processing and structure of hydrogenated polymorphous silicon (pm-Si:H) thin films. pm-Si:H thin films consist of a low volume fraction of silicon nanocrystals embedded in a silicon matrix with medium range order, and they possess this morphology as a significant contribution to their growth comes from the impact on the substrate of silicon clusters and nanocrystals synthesized in the plasma. Quadrupole mass spectrometry, ion flux measurements, and material characterization by transmission electron microscopy (TEM) and atomic force microscopy all provide insight on the contribution to the growth by silicon nanocrystals during PECVD deposition. In particular, cross-section TEM measurements show for the first time that the silicon nanocrystals are uniformly distributed across the thickness of the pm-Si:H film. Moreover, parametric studies indicate that the best pm-Si:H material is obtained at the conditions after the transition between a pristine plasma and one containing nanocrystals, namely a total gas pressure around 2 Torr and a silane to hydrogen ratio between 0.05 to 0.1. From a practical point of view these conditions also correspond to the highest deposition rate achievable for a given RF power and silane flow rate.
机译:在这项工作中,我们提出了氢化多晶硅(pm-Si:H)薄膜的等离子体处理和结构方面的新结果。 pm-Si:H薄膜由嵌入中等范围顺序的硅基质中的低体积分数的硅纳米晶体组成,它们具有这种形态,因为对其生长的重要贡献来自对硅团簇和纳米晶体基板的影响在血浆中合成。四极杆质谱,离子通量测量以及通过透射电子显微镜(TEM)和原子力显微镜对材料进行表征,都可以洞悉PECVD沉积过程中硅纳米晶体对生长的贡献。特别地,横截面TEM测量首次显示出硅纳米晶体在pm-Si:H膜的厚度上均匀地分布。此外,参数研究表明,最好的pm-Si:H材料是在原始等离子体和一种含有纳米晶体的材料之间转变后的条件下获得的,即总气压约为2 Torr,硅烷与氢的比例在0.05至0.1之间。从实际的角度来看,这些条件还对应于对于给定的RF功率和硅烷流速可达到的最高沉积速率。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号