首页> 外文OA文献 >Room-temperature heteroepitaxy of single-phase Al1-xInxN films with full composition range on isostructural wurtzite templates
【2h】

Room-temperature heteroepitaxy of single-phase Al1-xInxN films with full composition range on isostructural wurtzite templates

机译:同构纤锌矿模板上具有完整组成范围的单相Al1-xInxN薄膜的室温异质外延

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。
获取外文期刊封面目录资料

摘要

Al1-xInxN heteroepitaxial layers covering the full composition range have been realized by magnetron sputter epitaxy on basal-plane AlN, GaN, and ZnO templates at room temperature (RT). Both Al1-xInxN single layers and multilayers grown on these isostructural templates show single phase, single crystal wurtzite structure. Even at large lattice mismatch between the film and the template, for instance InN/AlN (similar to 13% mismatch), heteroepitaxy is achieved. However, RT-grown Al1-xInxN films directly deposited on non-isostructural c-plane sapphire substrate exhibit a polycrystalline structure for all compositions, suggesting that substrate surface structure is important for guiding the initial nucleation. Degradation of Al1-xInxN structural quality with increasing indium content is attributed to the formation of more point-and structural defects. The defects result in a prominent hydrostatic tensile stress component, in addition to the biaxial stress component introduced by lattice mismatch, in all RT-grown Al1-xInxN films. These effects are reflected in the measured in-plane and out-of-plane strains. The effect of hydrostatic stress is negligible compared to the effects of lattice mismatch in high-temperature grown AlN layers thanks to their low amount of defects. We found that Vegards rule is applicable to determine x in the RT-grown Al1-xInxN epilayers if the lattice constants of RT-sputtered AlN and InN films are used instead of those of the strain-free bulk materials.
机译:通过在室温(RT)下对基面AlN,GaN和ZnO模板进行磁控溅射外延,已经实现了覆盖整个成分范围的Al1-xInxN异质外延层。在这些同构模板上生长的Al1-xInxN单层和多层都显示出单相单晶纤锌矿结构。即使在薄膜和模板之间的晶格失配较大时,例如InN / AlN(类似于13%失配),也可以实现异质外延。然而,直接沉积在非等结构c面蓝宝石衬底上的RT增长Al1-xInxN膜对所有成分均表现出多晶结构,这表明衬底表面结构对于引导初始成核非常重要。随着铟含量的增加,Al1-xInxN结构质量的降低归因于更多点和结构缺陷的形成。在所有RT增长的Al1-xInxN薄膜中,除了晶格失配引入的双轴应力分量外,缺陷还导致显着的静液压拉伸应力分量。这些影响反映在测得的面内和面外应变上。与高温生长的AlN层中晶格失配的影响相比,静液压的影响微不足道,这是因为它们的缺陷数量少。我们发现,如果使用RT溅射的AlN和InN薄膜的晶格常数代替无应变块状材料的晶格常数,则Vegards规则适用于确定RT增长的Al1-xInxN外延层中的x。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号