The research of cylindrical surfaces roughness after burnishing

机译：抛光后圆柱表面粗糙度的研究

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Паливода Ю. Є.; Сидорик І. Т.; Palyvoda Yu. Ye.; Sydoryk I. T.;
展开▼
作者单位

展开▼
年度 2016
总页数
原文格式 PDF
正文语种 uk
中图分类

相似文献

外文文献
中文文献
专利

1. The influence of roller burnishing process on hardness and roughness of cylindrical polymer surfaces [J] . N S M El-Tayeb, K O Low, P V Brevern Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology . 2008,第7期

机译：辊抛光工艺对圆柱形聚合物表面硬度和粗糙度的影响
2. The influence of roller burnishing process on hardness and roughness of cylindrical polymer surfaces [J] . N. S. M. El-Tayeb, K. O. Low, P. V. Brevern Proceedings of the Institution of Mechanical Engineers, Part J. Journal of engineering tribology . 2008,第j7期

机译：辊抛光工艺对圆柱形聚合物表面硬度和粗糙度的影响
3. Investigation of the burnishing force during the burnishing process with a cylindrical surfaced tool [J] . Hongyun Luo, Jianying Liu, Lijiang Wang, Proceedings of the Institution of Mechanical Engineers, Part B. Journal of engineering manufacture . 2006,第b6期

机译：用圆柱表面工具研究抛光过程中的抛光力
4. Modeling and Optimization of surface roughness and microhardness for roller burnishing process using response surface methodology for Aluminum 63400 alloy [C] . Vijay Kurkute, Sandeep T. Chavan International Conference on Materials, Manufacturing and Design Engineering . 2018

机译：铝合金63400合金响应表面方法的滚筒抛光过程表面粗糙度和微硬度的建模与优化
5. Part surface roughness modeling and process optimal control of cylindrical grinding. [D] . Hecker, Rogelio Lorenzo. 2002

机译：零件表面粗糙度建模和圆柱磨削的过程优化控制。
6. Modelling the Influence of Slide Burnishing Parameters on the Surface Roughness of Shafts Made of 42CrMo4 Heat-Treatable Steel [O] . Rafał Kluz, Katarzyna Antosz, Tomasz Trzepieciński, 2021

机译：建模滑动抛光参数对42Crmo4热处理钢轴表面粗糙度的影响
7. Retraction Note: Effects of roller burnishing process parameters on surface roughness of A356/5SiC composite using response surface methodology [O] . Shashi Prakash Dwivedi, Satpal Sharma, Raghvendra Kumar Mishra 2018

机译：缩回注意：滚筒抛光过程参数对A356 / 5％SiC复合材料表面粗糙度的影响使用响应表面方法
8. Roughness Drag Due to Two-Dimensional Fabrication-Type Surface Roughness on an Ogive Cylinder from Force Tests at Transonic Speeds [R] . Czarnecki, K. R., Monta, W. J. 1969

机译：由于跨声速下力测试的二维制造型表面粗糙度导致的粗糙度阻力

The research of cylindrical surfaces roughness after burnishing

著录项

引文网络

相似文献

相关主题

期刊订阅