To realize in-situ structural health monitoring of critical infrastructure such as bridges, we present a powerful, but also low power and flexible, wireless sensor node utilizing a wake-up transceiver. The sensor node is equipped with several kinds of sensors, such as temperature, pressure and acceleration for in-situ monitoring of critical infrastructure. In addition to these commonly used sensors in wireless sensor networks, some nodes are equipped with global navigation satellite system receivers (GNSS) and others with tilt and acceleration sensors of very high accuracy that were developed by Nothrop Grumman LITEF GmbH. We present a low power wakeup multi-hop routing protocol that is able to transmit data with little overhead by supporting the use of wake-up receivers in combination with long-range communication radios. The wireless sensor nodes and the routing protocol are tested at a large-scale highway bridge in south-west Germany, where a prototype network was installed in June 2015 following a first test installation earlier in June at the same bridge. A gateway node equipped with a Global System for Mobile Communications (GSM) modem transfers the network data to a remote server located at the University of Freiburg.
展开▼
