Measurement of effective blast energy for direct initiation of spherical gaseous detonations from high-voltage spark discharge

摘要

In this study, effective energy from spark discharge for direct blast initiation of spherical gaseous detonations is investigated. In the experiment, direct initiation of detonation is achieved via a spark discharge from a high-voltage and low-inductance capacitor bank and the spark energy is estimated from the analysis of the current output. To determine the blast wave energy from the powerful spark, the time-of-arrival of the blast wave in air is measured at different radii using a piezoelectric pressure transducer. Good agreement is found in the scaled blast trajectories, i.e., scaled time c o·t/R o where c o is the ambient sound speed, as a function of blast radius R s/R o between the numerical simulation of a spherical blast wave from a point energy source and the experimental results where the explosion length scale R o is computed using the equivalent spark energy from the first 1/4 current discharge cycle. Alternatively, by fitting the experimental trajectories data, the blast energy estimated from the numerical simulation appears also in good agreement with that obtained experimentally using the 1/4 cycle criterion. Using the 1/4 cycle of spark discharge for the effective energy, direct initiation experiments of spherical gaseous detonations are carried out to determine the critical initiation energy in C2H2–2.5O2 mixtures with 70 and 0% argon dilution. The experimental results obtained from the 1/4 cycle of spark discharge agree well with the prediction from two initiation models, namely, the Lee’s surface energy model and a simplified work done model. The main source of discrepancy in the comparison can be explained by the uncertainty of cell size measurement which is needed for both the semi-empirical models.