The popularity of solar cell has been on the rise over the past few years. In order to be the substitute the fossil fuels, the energy production cost from solar cells must be reduced further. A lot of effort has been made by the scientific community to produce cheap and green energy from solar cells. High absorption coefficient and cost effective deposition technique have made polycrystalline CdTe a suitable applicant for thin-film solar cell technology. On the other hand, bulk heterojunction polymer solar cells based on blends of conjugated polymers (P3HT) and fullerene derivatives (PCBM) have shown great potential to produce efficient organic solar cells. ududLow availability of Te and need for enhancement of deposition speed influence to reduce the CdTe absorber layer. However, the overall cell efficiency of CdTe/CdS thin-film solar cell deteriorates unpredictably when the absorber width is reduced to sub-micron level. Deterioration of charge transport properties and their effects on voltage-dependent charge collection in submicron CdTe solar cells are believed to be responsible for this detrimental current-voltage. An analytical model for voltage-dependent photocurrent has been proposed in this thesis, considering partial depletion of the absorber and both electron and hole drift and diffusion in the depleted region and field free region, respectively, by solving continuity equations with proper boundary conditions. Exponential photon absorption and actual solar spectrum are considered to compute the photocurrent densities at entire output voltages. The results of the analytical model are verified by the 2D Taurus Medici device simulator. The model is also compared with recently published experimental results on ultra-thin CdTe solar cells in order to determine the carrier transport properties (defects and carrier lifetimes) and effective doping concentrations. ududThe efficiency of bulk heterojunction organic solar cells is mostly controlled by the dissociation of bound electron and hole pairs (EHPs) and charge carrier transport properties after dissociation. An analytical model has been developed considering both drift and diffusion of charge carrier to examine the relative effects of EHP dissociation and charge collection on the current-voltage characteristics. The effects of annealing on carrier transport properties are also examined. The theoretical model is also verified by the published experimental data.
展开▼
机译:在过去的几年中,太阳能电池的普及率一直在上升。为了替代化石燃料,必须进一步降低太阳能电池的能源生产成本。科学界已经做出了很多努力来从太阳能电池生产廉价的绿色能源。高吸收系数和具有成本效益的沉积技术使多晶CdTe成为薄膜太阳能电池技术的合适申请人。另一方面,基于共轭聚合物(P3HT)和富勒烯衍生物(PCBM)的混合物的本体异质结聚合物太阳能电池已显示出生产高效有机太阳能电池的巨大潜力。 Te ud的可用性较低,并且需要提高沉积速度的影响以减少CdTe吸收层。然而,当吸收体的宽度减小到亚微米水平时,CdTe / CdS薄膜太阳能电池的整体电池效率会意外地降低。人们认为,亚微米CdTe太阳能电池中电荷传输性能的下降及其对电压相关电荷收集的影响是造成这种有害电流-电压的原因。本文通过求解具有适当边界条件的连续性方程,提出了一种基于电压的光电流分析模型,该模型考虑了吸收体的部分耗尽以及耗尽区和自由场区中电子和空穴的漂移和扩散。考虑了指数光子吸收和实际太阳光谱,以计算整个输出电压下的光电流密度。分析模型的结果由2D Taurus Medici设备模拟器验证。该模型还与最近发表的超薄CdTe太阳能电池实验结果进行了比较,以确定载流子传输特性(缺陷和载流子寿命)和有效掺杂浓度。整体异质结有机太阳能电池的效率主要由结合的电子和空穴对(EHP)的解离以及解离后的电荷载流子传输特性控制。已经开发了一种同时考虑电荷载流子的漂移和扩散的分析模型,以检查EHP离解和电荷收集对电流-电压特性的相对影响。还研究了退火对载流子传输性质的影响。理论模型也得到了公开的实验数据的验证。
展开▼