首页> 外文OA文献 >Comparison of thermal behavior of natural and hot-washed sisal fibers based on their main components: Cellulose, xylan and lignin. TG-FTIR analysis of volatile products
【2h】

Comparison of thermal behavior of natural and hot-washed sisal fibers based on their main components: Cellulose, xylan and lignin. TG-FTIR analysis of volatile products

机译:基于天然,热洗剑麻纤维的主要成分:纤维素,木聚糖和木质素的热行为比较。 TG-FTIR分析挥发性产品

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This paper presents in a comprehensive way the thermal behavior of natural and hot-washed sisal fibers, based on the fundamental components of lignocellulosic materials: cellulose, xylan and lignin. The research highlights the influence exerted on the thermal stability of sisal fibers by other constituents such as non-cellulosic polysaccharides (NCP) and mineral matter. Thermal changes were investigated by thermal X-ray diffraction (TXRD), analyzing the crystallinity index (%Ic) of cellulosic samples, and by simultaneous thermogravimetric and differential thermal analysis coupled with Fourier-transformed infrared spectrometry (TG/DTA-FTIR), which allowed to examine the evolution of the main volatile compounds evolved during the degradation under inert and oxidizing atmospheres. The work demonstrates the potential of this technique to elucidate different steps during the thermal decomposition of sisal, providing extensible results to other lignocellulosic fibers, through the analysis of the evolution of CO2, CO, H 2O, CH4, acetic acid, formic acid, methanol, formaldehyde and 2-butanone, and comparing it with the volatile products from pyrolysis of the biomass components. The hydroxyacetaldehyde detected during pyrolysis of sisal is indicative of an alternative route to that of levoglucosan, generated during cellulose pyrolysis. Hot-washing at 75 C mostly extracts non-cellulosic components of low decomposition temperature, and reduces the range of temperature in which sisal decomposition occurs, causing a retard in the pyrolysis stage and increasing TbNCP and TbCEL, temperatures at the maximum mass loss rate of non-cellulosic polysaccharides and cellulose decompositions, respectively. However, enriching sisal fibers in cellulose produces a decrease of TbCEL under an oxidizing atmosphere, and furthermore, a delay of the combustion process, displacing TbCOM to higher temperatures. The results and findings of the paper would help further understanding of thermal processes where Agave fibers are involved, as the decomposition of their composites. © 2014 Elsevier B.V.
机译:本文以木质纤维素材料的基本成分(纤维素,木聚糖和木质素)为基础,全面介绍了天然和热洗的剑麻纤维的热行为。该研究强调了非纤维素多糖(NCP)和矿物质等其他成分对剑麻纤维热稳定性的影响。通过热X射线衍射(TXRD),分析纤维素样品的结晶度指数(%Ic)以及通过同时进行热重分析和差示热分析以及傅立叶变换红外光谱(TG / DTA-FTIR)来研究热变化。允许检查在惰性和氧化气氛下降解过程中产生的主要挥发性化合物的演变。这项工作通过分析CO2,CO,H 2O,CH4,乙酸,甲酸,甲醇的析出,证明了该技术在剑麻热分解过程中阐明不同步骤的潜力,从而为其他木质纤维素纤维提供了可扩展的结果。 ,甲醛和2-丁酮,并将其与生物质组分热解后的挥发性产物进行比较。在剑麻热解过程中检测到的羟基乙醛指示了在纤维素热解过程中产生的左旋葡聚糖途径的替代途径。在75°C的温度下进行热洗时,大部分会提取出分解温度低的非纤维素成分,并减少了剑麻分解发生的温度范围,从而导致了热解阶段的延迟并增加了TbNCP和TbCEL(最大质量损失速率为90%)。非纤维素多糖和纤维素分解。但是,在纤维素中富集剑麻纤维会使氧化气氛下的TbCEL降低,进而导致燃烧过程的延迟,从而将TbCOM移至更高的温度。本文的结果和发现将有助于进一步了解涉及龙舌兰纤维的热过程,作为其复合材料的分解。 ©2014 Elsevier B.V.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号