首页>
外文OA文献
>Synthesis of nanosized carbonated apatite by a modified Pechini method: hydroxyapatite nucleation from a polymeric matrix
【2h】
Synthesis of nanosized carbonated apatite by a modified Pechini method: hydroxyapatite nucleation from a polymeric matrix
展开▼
机译:改进的Pechini方法合成纳米级碳酸磷灰石:从聚合物基体中羟基磷灰石成核
展开▼
免费
页面导航
摘要
著录项
引文网络
相似文献
相关主题
摘要
Pechini method is a materials synthesis method based on the preparation of a polymeric matrix. The advantage of this method is the ability to obtain materials with different particle sizes depending on the synthesis condition with a homogeneous distribution. In this work, carbonated hydroxyapatite (c-OHAp) nanoparticles were obtained by a modified Pechini method. To obtain the polymeric precursor of the c-OHAp, the polymeric matrix was prepared through a polyesterification reaction between citric acid and ethylene-glycol. Adding calcium hydroxide and ortophosphoric acid in aqueous solutions, raising the temperature up to 140 C/2 h and keeping constant the pH at 8. The polymeric matrix was calcinated at different ranges of temperature from 200 to 600 C in order to obtain the c-OHAp powder. The results show the presence of c-OHAp a as unique phase. The thermal analysis indicates that the c-OHAp phase was obtained at 600 C. The particle size of the obtained material was50 nm
展开▼
机译:Pechini方法是一种基于聚合物基质制备的材料合成方法。该方法的优点是能够根据均匀分布的合成条件获得具有不同粒径的材料。在这项工作中,通过改良的Pechini方法获得了碳酸羟基磷灰石(c-OHAp)纳米颗粒。为了获得c-OHAp的聚合物前体,通过柠檬酸和乙二醇的聚酯化反应制备聚合物基质。在水溶液中加入氢氧化钙和原磷酸,将温度升高至140 C / 2 h,并保持pH值恒定在8。在200至600 C的不同温度范围下煅烧聚合物基质,以获得c- OHAp粉末。结果表明,存在c-OHAp a作为唯一相。热分析表明在600℃下获得了c-OHAp相。获得的材料的粒径为 50nm
展开▼