首页> 外文OA文献 >Superhydrophobic polymeric coatings produced by rapid expansion of supercritical solutions combined with electrostatic depostion (RESS-ED)
【2h】

Superhydrophobic polymeric coatings produced by rapid expansion of supercritical solutions combined with electrostatic depostion (RESS-ED)

机译:通过超临界溶液的快速膨胀和静电消除(RESS-ED)制成的超疏水性聚合物涂料

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In this paper we present a method to produce superhydrophobic polymeric coatings by combining the rapid expansion of supercritical solutions (RESS) with electrostatic deposition (ED). A copolymer, poly(vinyl acetate)-poly(vinyl pivalate) was dissolved in a mixture of supercritical carbon dioxide and acetone and sprayed through a nozzle with an applied voltage of 8 kV onto a surface placed on a earthed collector. Spray distance and polymer concentration were altered to find the most suitable spraying conditions. Superhydrophobic surfaces were produced when spraying both with and without a voltage, although the water repellent surfaces could be produced at a larger variety of processing parameters using the RESS-ED technique. The greatest improvement of using the RESS-ED process was that larger and thinner coatings were produced with a more even surface coverage of the created polymer particles compared to spraying without the applied voltage.
机译:在本文中,我们提出了一种将超临界溶液(RESS)的快速膨胀与静电沉积(ED)相结合的生产超疏水性聚合物涂层的方法。将共聚物聚醋酸乙烯酯-聚新戊酸乙烯酯溶解在超临界二氧化碳和丙酮的混合物中,并通过喷嘴以8kV的施加电压喷涂到放置在接地收集器上的表面上。改变喷涂距离和聚合物浓度以找到最合适的喷涂条件。尽管使用RESS-ED技术可在多种加工参数下产生疏水表面,但在施加电压和不施加电压时均会产生超疏水表面。与没有施加电压的喷涂相比,使用RESS-ED工艺的最大改进是产生了更大,更薄的涂层,生成的聚合物颗粒的表面覆盖更均匀。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号