首页> 外文OA文献 >FR4-based electromagnetic energy harvester for wireless tyre sensor nodes
【2h】

FR4-based electromagnetic energy harvester for wireless tyre sensor nodes

机译:基于FR4的电磁能量采集器,用于无线轮胎传感器节点

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

An electromagnetic (EM) power generator having 46 Hz resonance frequency is designed to scavenge mechanical vibrations occurring in tyres due to lyre-road contact. The major innovation is the use of FR4 as a structural spring material as well as utilizing a spacer and stopper mechanism increasing the shock resistance by limiting the maximum deflection. The novel magnet assembly and spacer design provide high power density. The tangential acceleration waveforms of typical tyre rotation is used as an input in the experiments and 0.4 mW power is obtained over a 100 Omega load resistance for 15g peak-to-peak amplitude at 22,83 Hz, corresponding to about 150 kph vehicle speed. Maximum acceleration is limited with the shaker, larger power values are expected in actual operation. The performance is obtained off-resonance and superior to resonant Silicon MEMS based scavengers.
机译:设计具有46 Hz共振频率的电磁(EM)发电机,以消除由于竖线接触而在轮胎中发生的机械振动。主要的创新是将FR4用作结构弹簧材料,并利用了垫片和限位器机制,通过限制最大挠度来提高抗冲击性。新颖的磁体组件和垫片设计可提供高功率密度。在实验中,将典型轮胎旋转的切向加速度波形用作输入,并在22,83 Hz的15g峰峰值振幅下,对应于约150 kph的车速,在100Ω的负载电阻下获得了0.4 mW的功率,负载峰值为15 g。振动筛限制了最大加速度,在实际操作中预期会有更大的功率值。该性能是通过非谐振获得的,并且优于基于谐振硅MEMS的清除剂。

著录项

  • 作者

    Hatipoğlu, Gökhan;

  • 作者单位
  • 年度 2017
  • 总页数
  • 原文格式 PDF
  • 正文语种 English
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号