首页> 外文OA文献 >Evaluation of the Strength of Carburized Spur Gear Teeth Based on Fracture Mechanics : 3rd Report, The Crack Growth in Carburized Gear

【2h】

Evaluation of the Strength of Carburized Spur Gear Teeth Based on Fracture Mechanics : 3rd Report, The Crack Growth in Carburized Gear

机译：基于骨折力学的渗碳齿轮齿强度评价：第三次报告，渗碳齿轮裂纹增长

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Gang DENG; Katsumi INOUE; Nobuo TAKATSU; Masana KATO;
展开▼
作者单位

展开▼
年度 1991
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Increasing the bending fatigue strength of carburized spur gear teeth by presenting [J] . J.L. Woods, S.R. Daniewicz, R. Nellyism International Journal of Fatigue . 1999,第6期

机译：通过提出增加渗碳圆柱齿轮齿的弯曲疲劳强度
2. Evaluation of Bending Strength of Carburized Gears Based on Inferential Identification of Principal Surface Layer Defects [J] . Tomoya MASUYAMA, Katsumi INOUE, Masashi YAMANAKA, JSME International Journal. Series C, Mechanical Systems, Machine Elements and Manufacturing . 2002,第3期

机译：基于主表面层缺陷推断的渗碳齿轮弯曲强度评估
3. Evaluation of Bending Strength of Carburized Gears Based on Inferential Identification of Principal Surface Layer Defects [J] . Tomoya MASUYAMA, Katsumi INOUE, Masashi YAMANAKA, JSME International Journal. Series C, Mechanical Systems, Machine Elements and Manufacturing . 2002,第3期

机译：基于主表面层缺陷推断的渗碳齿轮弯曲强度评估
4. Evaluation of bending strength of carburized gears based on a quantification of defect size in the surface layer [C] . Tomoya Masuyama, Masana Kato, Katsumi Inoue, International Power Transmission and Gearing Conference . 2000

机译：基于表面层缺陷尺寸的量化评价渗碳齿轮弯曲强度
5. Increasing the bending fatigue strength of carburized spur gear teeth by presetting [D] . Woods, Jody Lee. 1998

机译：通过预设增加渗碳圆柱齿轮齿的弯曲疲劳强度
6. Very High Cycle Fatigue Failure Analysis and Life Prediction of Cr-Ni-W Gear Steel Based on Crack Initiation and Growth Behaviors [O] . Hailong Deng, Wei Li, Tatsuo Sakai, 2015

机译：基于裂纹萌生和生长行为的Cr-Ni-W齿轮钢超高周疲劳失效分析和寿命预测
7. Evaluation of the Strength of Carburized Spur Gear Teeth Based on Fracture Mechanics : 2nd Report, Characteristics of Crack Growth Rate in the Carburized Layer [O] . Gang DENG, Katsumi INOUE, Nobuo TAKATSU, 1991

机译：基于骨折力学的渗碳齿轮齿强度评价：第2次报告，渗碳层中裂纹增长率特征
8. Surface Fatigue Life of Carburized and Hardened M50NiL and AISI 9310 Spur Gears and Rolling-Contact Test Bars [R] . Dennis P. Townsend, Eric N. Bamberger 1989

机译：渗碳和硬化m50NiL和aIsI 9310正齿轮和滚动接触试验棒的表面疲劳寿命

Evaluation of the Strength of Carburized Spur Gear Teeth Based on Fracture Mechanics : 3rd Report, The Crack Growth in Carburized Gear

著录项

引文网络

相似文献

相关主题

期刊订阅