首页> 外文OA文献 >Comparison Analysis Spindle Speed Constant with Cutting Speed Constant against Surface Roughness Gradual Turning Steel ST 37 on the NC PU 2A Machine

【2h】

Comparison Analysis Spindle Speed Constant with Cutting Speed Constant against Surface Roughness Gradual Turning Steel ST 37 on the NC PU 2A Machine

机译：比较分析轴速恒定恒定恒压逐方恒定逐步转动钢ST 37在NC PU 2a机上

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Defindo Efendi; Yufrizal A; Arwizet K;
展开▼
作者单位

展开▼
年度 2018
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. The Cutting Speed Influences on Tool Wear of ZTA Ceramic Cutting Tools and Surface Roughness of Work Material Stainless Steel 316L During High Speed Machining [J] . Afifah MOHD ALI, Norazharuddin Shah ABDULLAH, Manimaran RATNAM, Materials science forum . 2016,第期

机译：高速切削过程中切削速度对ZTA陶瓷切削刀具的刀具磨损和工作材料316L不锈钢表面粗糙度的影响
2. Cutting Features Between Surface Roughness in Feed Direction and Machining State of Radius End Mill Against Inclined Surfaces (In Case of Contour Machining and Five-Axis Machining with Constant Tilt Angle) [J] . International journal of automation technology . 2020,第1期

机译：进给方向上的表面粗糙度与半径立铣刀在倾斜表面上的加工状态之间的切削特性（在轮廓加工和恒定倾斜角的五轴加工中）
3. The Effect of Cutting Speed and Feed Rate on Surface Roughness and Tool Wear when Machining D2 Steel [J] . Mohd Rasidi Ibrahim, Tharmaraj Sreedharan, N. Aisyah Fadhlul Hadi, Materials science forum . 2017,第期

机译：切削速度和进给速度对D2钢加工时表面粗糙度和刀具磨损的影响
4. Influences of Cutting Speed on Surface Roughness during Machining of Chromium Molybdenum Steel with Ceramic Insert Cutting Tool [C] . Phacharadit Peangchit, Charnnarong Saikaew 2017 International Symposium on Computer Science and Intelligent Controls . 2017

机译：陶瓷刀片切削刀具切削速度对铬钼钢加工表面粗糙度的影响
5. Comparative Analysis between Grundfos CRE 15-3 Variable Speed Centrifugal Pumps and a Worthington D-824 Constant Speed Centrifugal Pump in a KU Steam Power Plant Application [D] . Schmidt, Fabian Philip 2014

机译：KU蒸汽电厂中的Grundfos CRE 15-3变速离心泵和Worthington D-824恒速离心泵的对比分析
6. Laser-Assisted High Speed Machining of 316 Stainless Steel: The Effect of Water-Soluble Sago Starch Based Cutting Fluid on Surface Roughness and Tool Wear [O] . Farhana Yasmin, Khairul Fikri Tamrin, Nadeem Ahmed Sheikh, 2021

机译：激光辅助高速加工316不锈钢：水溶性Sago淀粉基切削液对表面粗糙度和工具磨损的影响
7. A Study on the Roughness of Machined Surface of Metals : The case of mild steel, machined at a comparatively low cutting speed [O] . Keiji OKUSHIMA, Masami OMORI, Teruo FUJIHARA 1955

机译：金属加工表面粗糙度的研究：用钢的温和钢，以相对低的切削速加工

Comparison Analysis Spindle Speed Constant with Cutting Speed Constant against Surface Roughness Gradual Turning Steel ST 37 on the NC PU 2A Machine

著录项

引文网络

相似文献

相关主题

期刊订阅